Features

Accuracy: 2000g-0.1g；

Display: LCD and 5Digital;

Backlight: blue backlit. long time can be set on (0) or 5-240 seconds to close;

Automatic power saving feature: (5 digit LCD modules) still 60S automatic shutdown (6 digits LCD module) automatic power off time 0 does not shut down, 2,5,8-minute optional;

Display unit: ( 5 digit LCD modules) g/TL/oz/lb;

Display unit: ( 6 digit LCD module): g/CT/oz/TL/DWT/GN 6 units can be set switches;

Power supply: dry batteries, 6 c;

Dimensions: 215*150*42mm;

On/off (open key): shutdown press the power on, power off status under;

UNIT (unit selection key): every time I press the system cycles through a unit;

TARE (Peel-key): values are displayed as zero;

PCS (count key): weight press once to enter the count pattern;

Parameter setting and calibration ( six digits LCD modules effectively limiting)

The "on/off" to confirm

"The UNIT" choice and value added

"TARE" shift and decrease in value

"MODE" to exit

Weighing mode

Peel features

⑴. put an empty disk, wait until the display stabilizes, press the "TARE" button, the display shows "0" and peeling signs; when removing an empty disk is complete, press the "TARE" key, Peel features removed.

⑵. Peel range: nominal.

Zero function

⑴. If the display value is zero cannot be zeroed on the edge, press the "ZERO" button, the displayed number back to "0".

⑵. zero point range: (± 2%) x nominal??

Count function

When there is weight on the scales, at a time of "PCS" to enter counting mode. Blinking display sampling rate: 25,50,75,100 (pressing the UNIT key switch). "PCS" button confirm the sample proportion can be counted.

Calibration:

⑴. "UNITS" button, hold for 3 seconds, then release the button. the screen flashes "CALL" flickering display calibration values at a later time, (blinking), the scale is placed corresponding numerical weights. later displays "PASS" auto complete calibration. remove the weights can be weighed.