Instructions for use

Operation method

First, the instructions:
put the battery in battery compartment indicates the correct mounting, place the scale body in steady, wind-free table.

Press Notes:

The on/off button: switch machine key

PCS: Count button

TARE: peeled keys

UNTS/MODE: unit conversion button

1, power button on/off button power on, wait for three seconds to display 0 or 0.00 or 0.0 or 0.000

2, the scale should be placed on the scale, numerically stable after reading
3, press the unit key to change the weighing unit
4, power on press power button off
Second, unit convert key UNTS/MODE
Press this button to select the weight unit of their choice
there are four units for conversion.
Weight unit conversion value:
1ct/KELA =0.19997g 1oz/oz =28.3495g
1dwt/UK =31.1034g money =1.5552g 1ozt/Troy ounce
1GN /Grain =0.0648g 1TL/two =37.4999g
three, deduction/peeling

1, boot zero;
2, place the buckle weights on the scale;
3, pressing the Peel key (or TARE key t key) shows 0.0 or 0.00 indicates a deduction
of 4, and then add the items to be weighed, and readings is the net weight of the items at this time
Four, correct: there must be a corresponding correction weights
jewelry scale calibration method:

Calibration mode:

1. power off mode, press and hold "TARE" or "t"-fixed and then long press the "on/off" key to boot for 2 seconds, enter the code test status, and then short press "MODE" or "UNIT" or "m" button to enter the calibration mode. Display "CAL"

2. the weighing mode, press the "MODE" or "UNIT" or "m" button to enter the calibration mode, it displays "CAL"

Calibration method:

With above two species mode which of a entered school scales die displayed "CAL" yihou, again by "MODE" or "UNIT" or "m" key, displayed "CAL" words, will flashing several Xia and displayed calibration weight, in scales Shang put corresponding weight of weights, stable 3-4 seconds Hou completed weight calibration, displayed "PASS" Hou by "ON/OFF" key shut machine completed calibration.

Five, counting function (only some products)

Normal weighing of State Xia, in scales Shang placed must number (System advance set 25, and 50, and 75, and 1004 species samples number for select) of needs count of samples, press "PCS" key not let go, 2 seconds Hou display displayed samples number, then release "PCS" key, by "MODE" key (or "m" key, and "UNITS" key) can switch different of samples number, select finished Hou by "PCS" key confirmed samples number, that entered count State; if needs change samples number , You can follow these steps to reset; count condition press "MODE" button (or "m" button, the "UNITS" button), the system will exit count States, return to normal weighing status display weight values.

Solar-powered, multiple charging mode (only some products)

Six, counting function (only some products)

Long press the counterfeit keys ("MODE"), open the banknote on the side of the scale body lights, light alignment anti-forgery token can verify authenticity of the coin, let go off after you finish using counterfeit lamps.

Backlight function (only some products)

Boot mode, press the "LIGHT" button (or the "l" key) to turn on or off the backlight.

Seven, the cumulative function (only some products)

Normal weighing mode, place an item on the scale, weight stabilized to be displayed by clicking the Add button ("ADD" button), and then remove the items and then place another article on the scale, weight stable after holding down the add key (the "ADD" button) do not let go, the display shows two objects with a combined weight of SK in turn added more weight.

BA, solar-powered, multiple charging mode (only some products)

Solar Panel-equipped products, both fitted with a high-performance rechargeable batteries, as long as the electronic scales in the sunlight or incandescent bulbs can continue to charge the battery in the open; at the side of the product and is equipped with a standard USB interface, rainy days can use cell phone charger with USB interface or through a USB cable connected to the computer to charge the battery. (USB cable and charger for optional accessories)

Nine, use items:
1, the largest weighing no more than the maximum amount of drive + 2%.
2, overload will permanently damage the product.
3, the product is not exposed to very cold or very hot weather conditions, this product is in a normal environment can work well, prior to use, make products in a new environment fit for at least an hour.
4, prior to use, power on the scale's internal components warm up scales weighing times, this makes weighing precision.
5, place the product in a clean environment, dust, moisture, vibration and air, or electromagnetic interference may have adverse effects on the stability and accuracy of the product.
6, to gently, weighing objects when gently placed on the scale, so as to avoid inaccurate weighing or damage the scale's internal components. 7, because the product is a high precision products, so it is very careful handling to avoid vibration or falling.
8, in use on a stable horizontal surface without wind.
Ten, troubleshooting:
weighing the primary factor for inaccuracy or failure low battery, incorrect calibration, overload or operate on non-level surface. Please note that the above mentioned several points, with correct use and maintenance of your product.
1, do not display or displays a low battery symbol "Lo" need to change battery
2, "EEEEE" overload should immediately remove overload goods;
3, "o_ld" due to error that scales the internal core part is damaged (for example, impact, dropping or overload), try the re-scaling, If the sensor is not badly damaged, then recalibrate after use.
4, display 88888, in one plane of vibration, stability work.