Helmets for the daily care

1, helmet and water wiped, must not use organic solvents such as alcohol, petrol or corrosive liquids such as acids, alkalis to wipe.

2, helmet ventilation, can be placed in the shade to dry, should be kept away from moisture. But there's no sun, stress and collisions, so as not to damage it.

3, long unused helmet clean and dry, pulled on his jacket, top, back into the carton, height.

4, helmet the service life depends on the frequency of use of site, under normal circumstances, normal use and maintenance, 5 years need to be replaced.

Wear your helmet correctly;

1, first-time users should be gently removed the helmet goggles protective film on, open the buckle, cleaning of the internal and external surfaces, with particular attention to clear the inner surface of the protrusion. Wipe clean and kept ventilation or airing.

2, when two early open ventilation holes on the helmet.

3, took off his belt, glasses (if any) and gently lifted the goggles, respectively, with both hands holding down the strap buckle so that the rear of the helmet on the head, from the top on over your head. Can make some turns. Tight head and feel comfortable is appropriate.

4, tied tightly around the buckle on the jaw and tugging on it should not slip.

5, put on my glasses (if any), wear goggles. To close the vents, and can travel at this time.

Notes:

1 appropriate use, according to their head size of helmet. Correct choice is to wear a tight feeling.

2, pay attention to the product's lifespan, fiberglass, plastic, or a foam, there are aging, helmet performance will drop over time, so the expired product should never be used.

3, check the helmet appearance, appeared damaged, scratches and cracks in the helmet cannot be used.

4, accidents or collisions of helmets discontinued.