Follow multiples of 50, thank you!

We are now doing, and therefore are generally shipped the next day and photographed a lot more patience and understanding, please, thank you!

Product description: vertical blister card

Size: 1.5G

Qty: 12 PCs per card as a set of 50 cards into a box.

502 胶

Molecular formula:CH2:CHCNCOOC2H5

Is to Alpha-cyanide base acrylic b ester mainly, joined increased stick agent, and stable agent, and increased toughness agent, and resistance poly agent,, through advanced production process synthesis of single group copies moments curing adhesive, applies range for except on polyethylene, and polypropylene, and containing fluoride and the containing Silicon plastic, and rubber, and soft mass PVC, material must for special processing (like polished surface) to get good strength outside, on other various material are can directly stick received.

2 用途

Porous and absorbent material connection

+ Selective use of ++ very suitable for

3 特点

1 , single composition: solvent-free and easy to use. Moments 2, then: the use of trace amounts of water vapor in the atmosphere, then in a very short time. 3, cold hardening at room temperature without heating can be used. 4, transparent colorless: good results do not deteriorate. 5, high viscosity: suitable for porous and absorbent material.

2 the event exposed, contact with trace amounts of water vapor in the air, which is rapid polymerization catalyzed by curing adhesion characteristics, so it is called instant adhesives. This product is widely used in iron and steel, non-ferrous metals, non-metallic flexible materials like ceramics, glass, wood and plastic products, leather shoes, soft and hard plastic and so on themselves or bonded with each other, but for hard materials such as PE, pp, Teflon, its surface specially treated before being bonded.

5 使用说明

Using method

1 , first clean surface, remove surface dirt, grease, rust and so on, when the metal, the best PACKING, such as PE, PP and PTEE plastics, surface activation first.

2 , open the front cover, and tapped her fingers on the tip part, so there is no residual fluid, then the scissors to cut out the hole. 3, was followed by dropping a small drop of glue, instantly and keep up to harden, then size should not be too large, then the layer thickness should not exceed 0.2mm.

4 , after use, wipe the container and lid and store in a cool, dry place or refrigerated.

4 除去方法

1 , 502 response cannot be reversed, could not be dissolved with a new 502 (502 wrong dissolved 502 is the Internet).

2 , insulating oil, pour transformer insulating oil at table, 502 glue will soon become soft and can begin to rub out. Acetone wash

502 glue is a resinous gum, organic solvents dissolved resin for as long as you can, such as acetone. But inhaling acetone poisonous, using methods, you can partially stuffed into a bottle of glue. Is said to have frozen in the fridge, glue will fall off, you can try it. (Fridge frozen not off)

3 , a small area of 502 glue on stick, soak in hot water as long as you can, if large areas coated with 502 glue, apply acetone, approximately 5-10 minutes may drop.

4 , with a little face wash painting is glued into place, gently rub and wash with warm water.

502 glue a resin adhesive, use dissolved resins in organic solvent such as acetone (acetone poisonous, using methods).

Matters needing attention

1 , glue vapors can irritate mucous membranes and eyes. 2, avoid contact with skin and eyes, if by accident, immediately wash with plenty of water and taken to hospital, when cleaning the eyes, use a dilute solution of sodium bicarbonate.

3 and touches hands when SOAP and water and cleaning solution and wash the pumice.

4 , to avoid the reach of children.