Chat
High-grade steel wire wire of carbon steel screw clamp bolt cutter wire cutters hardware tools
| Packaging information: |
|
|---|
The specifications:
The price of the above products is the price of single carton packaging. If additional packaging is needed (such as Oxford bags, PVC bags, gift boxes), the price is calculated separately.
If all products are electroplating, electrophoresis, black oxidation, polishing and other processes on the color, allowing a certain range of color differences
Hardness requirement
Blade edge hardness is not lower than HRC53.
Hardness of bolt, platen, center shaft HRC33 -- 40.
The surface quality
There should be no cracks, rust and harmful scars, burrs and other defects on the surface of each part.
Any surface treatment of the parts, must be uniform color, there must not be obvious spots, spots, omissions, bubbles, peeling and flow mark.
The surface roughness Ra of the two inclined surfaces of the blade edge is not greater than 3.2um, and the surface roughness Ra of the rest of the cutting parts of the blade
No greater than 6.3um.
Three features:
1. The scissor head is made of high quality lovanadium steel, specially hardened and annealed, with a blade hardness of 62HRC
· shear hardness reaches 48HRC
,
2. Strong bolts with high strength, together with locknuts, all undergo special heat treatment and powder spraying
· strong, non-slip dual color and double material handle
3. The handle is closely matched with the scissor head body, which is firm and reliable
4.PVC grip handle feels comfortable
5. Sharp cutting edge, wear resistance, low shear resistance
6. The handle selects dupont material as the coating layer, which is brightly colored and durable
The Angle design of the clamp head with ergonomic principle only needs to apply minimum external force
· precision adjustment through eccentric bolts (12 adjustment positions)
· perform high-performance shear with minimal external force, thanks to the perfect joint of optimized shear opening Angle, torque transmission ratio and ergonomic handle shape
Bolt shears are replaceable
Iv. Maintenance and use of tools:
Confucius said, \"if work desires to do good, it must first use its tools.\" To complete the task of processing or assembling perfectly, the first thing is to equip proper tools. Hardware tools cannot only be used without maintenance, which will reduce the task of using hardware tools. Please use and maintain your tools reasonably.
(I) maintenance of manual tools:
All tools should be checked and maintained regularly. Please wipe off the surface of the tools after each use. If the products are made of metal, please apply rust oil to prevent rust.
Repairs should be made immediately in case of failure or damage.
Tools should be used before the correct method and scope of use, the selection of appropriate tools for maintenance operations, long-term inappropriate tools, must be maintained.
All manual tools must be used according to the purpose designed. Do not use until the tool is installed firmly. Never use defective or damaged tools.
(2) principles for the safe use of manual tools:
1. Select manual tools suitable for work.
Keep the tools in good condition.
3. Select the manual tool with good material.
Check the manual tool carefully before use.
V: separation of bolt clippers:
When you press it to the bottom, continue to press hard to see its deformation degree. The smaller the deformation, the greater the rigidity, the greater the rigidity, the higher the strength.
If it is hydraulic, press it to the bottom and then press it again to see if there is no air leakage (liquid), then look at the toughness of the mouth, and the material of the clamp body. The comparison is not distinguishable.
Common specifications and prices:
12 inch price 18.5 36 PCS/CTN single pcs weight 0.8 KG
14 inch 19 yuan 36 PCS/CTN Single pcs weight 1.0kg
18 inch pirce 22.5 yuan 20 PCS/CTN Single pcs weight 1.5kg
24 inch price 32 RMB 10 PCS/CTN Single pcs weight 2.5kg
30 inch price 43 yuan 8 PCS/CTN Single pcs weight 4.0kg
36 inch price 49 yuan 5 PCS/CTN Single pcs weight 5.1kg
42 inch price72 yuan 4PCS/CTN Singlepcs weight 8.0KG
48 inch price 76 yuan 4 PCS/CTN Single pcs 8.5kg
The price of the above products is the price of single carton packaging. If additional packaging is needed (such as Oxford bags, PVC bags, gift boxes), the price is calculated separately.
If all products are electroplating, electrophoresis, black oxidation, polishing and other processes on the color, allowing a certain range of color differences
2. Technical requirements:
Hardness requirement
Blade edge hardness is not lower than HRC53.
Hardness of bolt, platen, center shaft HRC33 -- 40.
The surface quality
There should be no cracks, rust and harmful scars, burrs and other defects on the surface of each part.
Any surface treatment of the parts, must be uniform color, there must not be obvious spots, spots, omissions, bubbles, peeling and flow mark.
The surface roughness Ra of the two inclined surfaces of the blade edge is not greater than 3.2um, and the surface roughness Ra of the rest of the cutting parts of the blade
No greater than 6.3um.
Three features:
1. The scissor head is made of high quality lovanadium steel, specially hardened and annealed, with a blade hardness of 62HRC
· shear hardness reaches 48HRC
,
2. Strong bolts with high strength, together with locknuts, all undergo special heat treatment and powder spraying
· strong, non-slip dual color and double material handle
3. The handle is closely matched with the scissor head body, which is firm and reliable
4.PVC grip handle feels comfortable
5. Sharp cutting edge, wear resistance, low shear resistance
6. The handle selects dupont material as the coating layer, which is brightly colored and durable
The Angle design of the clamp head with ergonomic principle only needs to apply minimum external force
· precision adjustment through eccentric bolts (12 adjustment positions)
· perform high-performance shear with minimal external force, thanks to the perfect joint of optimized shear opening Angle, torque transmission ratio and ergonomic handle shape
Bolt shears are replaceable
Iv. Maintenance and use of tools:
Confucius said, \"if work desires to do good, it must first use its tools.\" To complete the task of processing or assembling perfectly, the first thing is to equip proper tools. Hardware tools cannot only be used without maintenance, which will reduce the task of using hardware tools. Please use and maintain your tools reasonably.
(I) maintenance of manual tools:
All tools should be checked and maintained regularly. Please wipe off the surface of the tools after each use. If the products are made of metal, please apply rust oil to prevent rust.
Repairs should be made immediately in case of failure or damage.
Tools should be used before the correct method and scope of use, the selection of appropriate tools for maintenance operations, long-term inappropriate tools, must be maintained.
All manual tools must be used according to the purpose designed. Do not use until the tool is installed firmly. Never use defective or damaged tools.
(2) principles for the safe use of manual tools:
1. Select manual tools suitable for work.
Keep the tools in good condition.
3. Select the manual tool with good material.
Check the manual tool carefully before use.
V: separation of bolt clippers:
When you press it to the bottom, continue to press hard to see its deformation degree. The smaller the deformation, the greater the rigidity, the greater the rigidity, the higher the strength.
If it is hydraulic, press it to the bottom and then press it again to see if there is no air leakage (liquid), then look at the toughness of the mouth, and the material of the clamp body. The comparison is not distinguishable.