All the prices of our products exclude freight  No tax VAT is required General invoice specific consulting customer service

Store address: 4th street, 10 district, international means of production market, yiwu city, zhejiang province  21131211 32 stores 

Store phone: 0579-89355500

Mobile phone: 18072684810 (same number as WeChat)

Welcome new and old customers to visitShop, telephone consultation

                                                     
Product information:

Voltage: 220V /50HZ

Power: 1.7 KW/h  

Product size: 900*420*760mm

Production capacity: 1 plate /2 minutes

Product display

Products use

 1: the firstThe popcorn machineTurn on the heat preservation lighting switch, turn on the heating switch, put in 50 grams of peanut oil, press the rotary switch, must preheat after 3 minutes, then turn off all the switches, pour out the peanut oil. (new machine according to this operation, the service life of the pot increased more than two times)

2: turn on all the function switches (lighting switch, heating switch, rotating switch), and then add 50--60 grams of popcorn butter (or coconut oil, fruit-flavored oil), 100 grams of popcorn corn. (the pan must be preheated for 3 minutes.Commercial popcorn makerSpecial 60-70 grams of sugar. Then lower the lid and close the glass door.

3: operators should pay attention to the popcorn, such as the noise becomes smaller, rice flower burst, immediately turn off the heating switch, and continue to rotate for 3 to 5 minutes, immediately pour out

4: clean the bottom of the pot, wipe it clean with a semi-wet towel, (if the bottom of the pot has scorched phenomenon, should immediately add 150 ml of boiling water, water can cover the bottom of the pot, and then heated and rotated for 10 minutes or so), make it clean before the second pot burst.

5: after the popcorn machine stopped using, to keep the machine clean and tidy, all around the glass without oil stains, no water marks. The garbage tray must be cleaned in time. Turn off all function switches and power supply.

1, in the cleaning and maintenance should be cut off the power, unplug to prevent accidents.

2. Clean the surface of the fuselage with semi-dry and wet towels that do not contain corrosive cleaning economy. It is strictly prohibited to wash the popcorn plate and the whole machine with water, otherwise water will infiltrate, damaging the electrical properties and affecting the normal work of the product.

 3. It is not allowed to use metal hard objects to wash and blast the grain machine disk inside and outside, so as to avoid the damage of non-stick coating inside the disk.

4. When it is out of service for a long time, unplug and cut off the power supply, and keep it properly.

 Cleaning and maintenance 

1. During cleaning and maintenance, power should be cut off to prevent accidents. 

2. After every day's work, use the non-corrosive detergent diluent on the wet towel to clean the surface of the equipment and power cord. It is strictly prohibited to wash the surface of the electrical box directly with water to avoid damaging the electrical performance. Warning: do not use steam cleaner. 

Landline: 0579 --89355500

Phone: 18072684810

Email:avelyn.cai@hotmail.com
SKYPE:avelyn.cai.hotmail.com
Website: www.dreamdar.cn
 
 

  The company map