Chat
Instantaneously powerful glue, 110 glue, 502 glue super glue.
| Packaging information: |
|
|---|
Specifications: 1.5 g, 2 g. 2.5 g. 3 g. 5 g
Application scope:
502 instant strong adhesive is made of advanced technology, environmental protection, no solvent. It is suitable for adhesion and repair of metal, wood, rubber, ceramics, electronics, crafts, leather, gem jade, crystal, jewelry, vehicle parts, etc.
3. Strictly control the amount of glue, immediately wipe the glue after coating, and do not immediately pack or seal the adhesive, and then pack it after completely solidified;
4. If bleaching occurs, apply a dry cloth to acetone or hot water. Precautions: 1. Keep the workplace common and avoid children's contact;
2. Wear leather gloves when operating. If skin or eyes are touched, wash or seek medical treatment immediately;
3. Store in cool, dry, general and away from high temperature;
Application scope:
502 instant strong adhesive is made of advanced technology, environmental protection, no solvent. It is suitable for adhesion and repair of metal, wood, rubber, ceramics, electronics, crafts, leather, gem jade, crystal, jewelry, vehicle parts, etc.
Usage:
1. Adhesion requirements: use acetone and other solvents to remove dirt and oil stains on the surface of the adhesive, and then apply glue after cleaning. When the metal is next, it will be worn first.
2. Application environment: in the work place with large amount of glue, air circulation should be strengthened and high-temperature operation should be strictly prohibited;3. Strictly control the amount of glue, immediately wipe the glue after coating, and do not immediately pack or seal the adhesive, and then pack it after completely solidified;
4. If bleaching occurs, apply a dry cloth to acetone or hot water. Precautions: 1. Keep the workplace common and avoid children's contact;
2. Wear leather gloves when operating. If skin or eyes are touched, wash or seek medical treatment immediately;
3. Store in cool, dry, general and away from high temperature;
4. Please do the experiment first when the user is in batch. Avoid improper operation and affect the bonding effect.
