Product Name: Glass Lotus Vase

Product Data Table:

The production process of glass

 （一）造型设计To translate the design creation concept into a graphic design draft, and then sculpt a three-dimensional prototype. In order to achieve the perfect proportions and aesthetics, every stroke and cut must be extremely precise and delicate.

  (2) Make silicone mold by coating the surface of the prototype with silicone and fixing the shape with plaster, and then make a silicone negative mold.

  (3) Casting wax moldPour hot melted wax into the mold, and let it cool and solidify to form a positive mold. The details of the hollowed-out and chamfered areas must be carefully removed with carefulness, patience, and the skillful strength of both hands.

  （4）Carefully repair the wax mold by repairing the wax positive mold, the hair edge, and the air holes.

  (5) Casting the plaster mold: Pour the fire-resistant plaster into the wax mold after modification, forming a wax-containing plaster mold. Then, heat the mold with steam to remove the wax, and the fire-resistant plaster negative mold is completed.

  (6) Firing: Place the plaster mold with the prepared glass mixture into the furnace and gradually heat it up.1000COn the left and right, the softened crystal glass flows into the plaster mold to form.

  (7) Remove the plaster mold after it cools down and cools down from the furnace, carefully remove the plaster mold to obtain the rough glass work.

The process of grinding and polishing involves repeatedly grinding and polishing the work until the luster of the glass is revealed, showcasing a crystal-clear texture, thus completing the piece.

Logistics and Receipt
Your satisfaction is our motivation.