Chat
MATEX IABRDI LEADERS AUTO MANAS GASKET MAKER sealant
| Packaging information: |
|
|---|
Product description:
Sealant is prepared by introducing advanced production technology. Single component, high seal strength, good high temperature resistance, durable weather resistance, non-sagging surface coating, good oil resistance, no corrosion, no irritating gas, no shrinkage of curing substances, easy stripping of colloids, environmental protection non-toxic. It is not limited by the size and shape of the binding surface. It can replace all kinds of rubber pad, asbestos pad, cork pad and paper cushion, which can effectively prevent water, oil and gas leakage and has good sealing and leakage effect.
Application scope:
This adhesive can replace all kinds of rubber pad, asbestos pad, cork pad and paper pad, which can effectively prevent water, oil and gas leakage and has good sealing effect. It is suitable for the plane sealing of machinery, automobile, motorcycle, tractor, ship engine, gear box, oil tank, electromechanical equipment, electric appliance, instrument, electron and chemical equipment, and the sealing of pipe joint and cover plate joint surface.
Instructions:
1. Clean water, dust, oil, rust spots and other contaminants on the surface of the adhesive;
2. Puncture the pipe nozzle with the cap, evenly apply the gel from the outer edge to the inner edge about 1.6-3.2 mm thick, with good sealing.3. About 10-20 minutes after the glue is applied, when the film surface reacts, align the two sealing surfaces and press them to tighten;
4, under the room temperature is 25 ℃ placed 10 hours or 24 hours after use, sealing efficiency is very high;
5. For the untreated gel, cover the tube cover, wash hands with clean water and clean the tools. Notes: 1. Keep the workplace ventilated to avoid children's contact;
2. Wear leather gloves during operation. If touching the skin or eyes, clean them with water or seek medical treatment immediately;
3. Store in a cool, dry and ventilated place and keep away from high temperature;
4. Before using in batches, the user should do the experiment first to avoid affecting the bonding effect due to improper operation.
