We have produced battery clips from 50 A- -2000A

Specification 8 * 0.14mm * 70 50PCs

Box gauge: 56*25*40

When your car is out of power, don't worry, take a taxi from the side of the road and get it easily done with two clips. Cars rarely run out of electricity, but once in a while, they are really anxious to death. I am not afraid of 10,000, but I am afraid that it will be better to bring a battery clip in case. I have no worries.

The connection procedure is as follows:

(1) first, put the red electric wire clamp of the starting line on the positive electrode of the Red battery of the "rescued car.

(2) then put the red wire clamp at the other end on the positive electrode of the Red battery of the "rescue vehicle.

(3) put the black wire clamp on the black negative battery of the "rescued car.

(4) then put the black wire clamp on the black negative battery of the "rescue vehicle.

(5) start the engine of the "rescue vehicle" first, and then start the engine of the "rescued vehicle. If the rescued vehicle still fails to start, please check whether the metal contact part has poor contact. After starting the engine, you still need to remove the starting fire line in sequence, otherwise it may cause short circuit.

The procedure for removing the line is as follows:

(1) first remove the black wire of the "rescued car.

(2) remove the black wire of the "rescue vehicle.

(3) then remove the red wire of the "rescue vehicle.

(4) then remove the red wire of the "rescued car.

We can also customize various other items: