Product Information:

Voltage: 220V /50Hz

Power: 1.35kw/h

Product Size: 940*500*1600mm

Production capacity: two minutes per plate

Product Display

Product Use

 1: First popcorn Machine plug in the power supply, turn on the thermal insulation lighting switch, turn on the heating switch, put 50 grams of peanut oil, click the rotary switch, must warm up for 3 minutes, then turn off all switches, pour out peanut oil. (The new machine is operated according to this, and the service life of the pot is improved by more than two times)

2: turn on all function switches (lighting switch, heating switch, rotary switch), then add 50 -- 60g popcorn special cream (or coconut oil, fruity oil),100g special corn for popcorn. (The pot must be preheated for 3 minutes), finally put commercial popcorn machine special White Sugar 60-70 grams. Then put the lid down and close the glass door.

3: The operator should pay attention to the situation of popcorn. If the sound of popcorn becomes smaller and the rice flower breaks out in large quantities, immediately turn off the heating switch, and then continue to rotate for 3 to 5 minutes to pour out immediately.

4: Clean the the bottom of a pan, wipe the pot with a semi-wet towel, (if the the bottom of a pan is burnt, immediately add 150 ml of boiling water, the water can submerge the the bottom of a pan, then heat and rotate for about 10 minutes), only after cleaning it can it explode in the second pot.

5: after stopping using the popcorn machine, keep the machine clean and tidy, and there is no oil stain and no watermark on the four sides of the glass. The garbage tray must be cleaned up in time. Turn off all functional switches and power supplies.

1, in the cleaning and maintenance should be cut off the power supply, unplug the plug to prevent accidents.

2. Use a semi-dry wet towel that does not contain corrosive cleaning cream to clean the surface of the machine. It is strictly forbidden to use water to directly wash the popcorn plate and the whole machine, otherwise let the water penetrate and damage the electrical performance and affect the normal work of the product.

3. It is not allowed to wash the inside and outside of the popcorn machine plate with metal hard objects, so as not to cause damage to the non-stick finish in the plate.

4. When stopping for a long time, you need to unplug and cut off the power supply and keep it properly.

  Cleaning and maintenance 

1. During cleaning and maintenance, the power supply should be cut off to prevent accidents.

2. After the work is completed every day, use wet towel with non-corrosive detergent to clean the surface of the equipment and power lines. It is strictly prohibited to rinse the surface of the electrical cabinet directly with water, so as not to damage the electrical performance. Warning: steam cleaner cannot be used for cleaning.

Fixed Phone: 0579-89355500

Mobile phone: 18257926263

Email:avelyn.cai@hotmail.com
SKYPE:avelyn.cai.hotmail.com
Website: www.dreamdar.cn
 
   

   Company map