The main purpose

1. Furniture manufacturing industry: adhesive mercury lens, aluminum edge sealing, handle, crystal plate, marble, plate adhesive, etc.;

2,Adornment is decoratedIndustry: glue and fix all kinds of wood wire, door cover wire,Gesso line, floor tiles, various decorative pendants and various wallboard projects and so on;

3. Exhibition industry: bonding and fixingAll kinds of paintings, signs, acrylic, exhibition GUI production and so on.

4,Ambry door plankIndustry: bonding crystal steel plate, etc.

This product is used for covering materials, wood, plasterboard, metal, mirror, glass, plastic, rubber, baseboard, shutter, threshold, window sills, post, pillar, junction box, all kinds of artificial materials,Ornamental stonesFixtures and tiles are fixed to concrete, brick, plaster, walls and cardboard.

Clean the construction surface and ensure there is no grease or dust.

Cut tube mouth, install nozzle, extrude with sealing gun.

Dry bonding (suitable for light materials and joints with light bearing capacity)

1. Extrude several lines of \"z-shaped\" liquid nails with a distance of 40 cm;

2. Press the side with the liquid nail tightly to the adhesive, gently pull it open, and let the glue evaporate for 2 to 5 minutes;

3. Then press the two sides together.

2. Wet bonding method (suitable for use with clamping tools under large pressure only)

1. Apply liquid nails according to dry bonding method;

2, with the clamp, nails or screws, immediately glue the two sides or nail tight;

3. After solidification (24 hours), remove the clamp.

Bonding method of loading material:

Can be directly bonded to the loading material. First, the loading material is glued together, and then it is separated, waiting for about 5 minutes to dry, again to be glued the material firmly pressed and knocked tight, make it in place. Prop up if necessary. (heavy material must be supported)

Dry joint bonding method :(sky yarn, kick wire, door frame, background wall)

1. Extrude \"of\" type adhesive along the adhesive surface

2. Squeeze the adhesive side to the sticky side and press both sides tightly

3. Pull the two bonding surfaces apart and allow the superglue to evaporate for 2-5 minutes

After 4.2-5 minutes, press again and tap gently along the joint.

5. Use auxiliary tools to temporarily fix the adhesive for 24 hours and then cancel the auxiliary fixation.

6.the adhesive effect can be achieved within 24 hours and completely cured within 2-3 days

Wet joint adhesion :(wood floor,Marble top)

1. Apply liquid nail superglue according to the dry bonding method

2. Press the adhesive surface tightly, and the adhesive effect can be achieved within 24 hours, and it can be completely cured within 2-3 days.

Quick-adhesive liquid nails have ultra-fast adhesion, especially in many surface effect is more significant, as long as any surface is multi-space structure, can achieve rapid adhesion effect, no need for any auxiliary device in the process of adhesion.