B7000 needle glue for sticking drill

Specification: 15 ml / 25 ml / 50 ml / 110 ml 

【Scope of applicationTransparent imported glue, size and specification of two, blister packaging, convenient for delivery and transportation, not easy to crush, qualityPeriod more durable, needle design easy to use, applied to all walks of life. It is suitable for handicraft making, such as crystal water drill, bead binding, watch ornament, headwear, mobile phone case DIY, etc., with unique pinhole design, even complex and small parts can be operated accurately

【 property 】This kind of glue is environmentally friendly, completely transparent and does not damage the material. It is especially suitable and convenient.

\"Advantages\"Glue quality is superior, environmental protection packaging is beautiful and easy to operate

Typical features and USES: 1. Hydraulic drill professional bonding 2. Repair ceramic and wood figurines 3. Replace the broken piece on the broken cup 4. Assembly handicraft design 5. Repair garden and garden statues. Fix the cracks and cracks in the wooden frame 7. Rebuild destroyed edge Angle 8. Fill nail holes and drill holes 9. 10. Can be used in busy traffic areas as a protective layer for contact surfaces. 11. Good acid and alkali resistance, can be used as corrosion resistant protective coating in acid and alkali environment (such as salt water or sulfuric acid). 12. Insulation performance: excellent dielectric insulation and resistance, suitable for electronic equipment. 13. Non-flammable. 14. Others: high impact resistance and no vertical flow during shrinkage, bursting or curing molding process. Once cured, it can be ground, ground, filled, hammered, cut into drill holes, and can sweep most paints. Can be molded into any shape to replace damaged or missing pieces. Construction can be carried out on the vertical plane without vertical flow. Easy color compatibility with powder colorants, most water-based colorants and food dyes.

[B7000 technical data]

Appearance: transparent semi-fluid

Solid content: 28-35%

Hardness after curing: 65-80a

Surface dry time: about 3-6 minutes

Full curing time: 24-48 hours

Colloid: transparent flexible colloidal semiconductor

Properties: no white, no crisp, no yellow, no hard smell is very small

Save: store at 10 to 30 degrees

Concentration comparison: 

B - 6000 (3200 CPS)

B - 7000 (2800 CPS) 

E 8000 (2500CPS)

Usage and precautions 

Read the instructions before use. Use only in a well-ventilated environment. The adhesive surface shall be clean, dry and free of dust. The surface shall be roughened before use to ensure the adhesive strength. It can be used between 10℃ and 32℃, and the temperature between 21℃ and 29℃ has a good effect.

2. Apply it directly on the surface to be bonded, and press it tightly. After about two minutes, it will start to thicken and set in 10 minutes. When the temperature is low, the curing time will be prolonged, and when the temperature is high, the curing time will be shortened. The curing can be accelerated by hand-held hair dryer, which should be set at low temperature, not directly to the universal adhesive.

Remove the wet glue with acetone or turpentine. The cured material can be removed or scraped off with a tool.

Do not dry clean the fabric if the adhesive is used to bond the fabric.

This kind of universal adhesive is not recommended for bonding foam polystyrene, polystyrene, polyethylene and polypropylene plastics.

Storage: freeze/thaw at 10 to 27 ° c: bring the product to room temperature before opening the lid

This shop also has each kind of spot drill the glue quantity to be large from excellent whole case wholesale more preferential more detailed information may add WeChat understanding to thank