Trouble 4 bottles to shoot, 4 bottles of a small tank loaded in the same color, the factory defaults to present garbage bag card tools, the demand is small, the card can also be replaced by buying a poker, thank you for your cooperation!

Haoshun automobile wheel hub spray film all-car tire body wheel hub color change wheel hub spray paint hand-tearable paint film

color change tearing film is a natural and dry rubber coating agent, which is specially used for spraying on the wheel hub, car paint, car interior exterior decorative parts, etc. for rapid color change. The construction is convenient, the color is gorgeous and lasting after the film is formed, the texture is good, and it can be torn off at any time when it is not needed, without damaging the wheel hub, car paint, etc. It is suitable for car owners to do DIY color changing, and also suitable vehicle beauty shops and refitted shops to do professional color changing. It is suitable for parts that need color change such as automobile wheel hub, paint surface, air intake grid, internal exterior decorative parts, etc.

[Product name]: Haoshun automobile wheel hub spray film all-car tire body wheel hub color change wheel hub spray paint tearable paint film

[Product's brand]: Haoshun Auto Wheel hub spray film all-car tire body wheel hub color change wheel hub spray paint tearable paint film

[Product model]: HS-SJS

[Product capacity]: 400ml(300g)

[The weight of a single bottle is about]]:
[Number of outer boxes]: 4PCs

[Applicable model]: basic universal type

[Applicable standards]]:

[Product performance]]:

[Method of use]]:

1. Clean the dust, dirt, rust spots, etc. on the surface of the objects that need to be sprayed;

2. Plug the hub with plastic film or newspaper to protect the brake disc and parts that do not need spraying, and insert the matching small card or playing card at the seam between the tire and the hub to cover the tire;

3. Shake this product repeatedly for 1-2 minutes, shake the internal solution well;

4, the first small tried spray, 5 fen zhong after confirm that there is no single, with big range;

5. Press the nozzle and spray evenly back and forth 15-25cm from the surface of the object;

6. In order to obtain better results, it is necessary to spray 6-8 times and spray every three minutes. It is recommended to spray a pot with a hub;

7. Disassemble the props after the full form of the film is dried (if conditions permit, please remove the tire or hub, which is easier to construct).

[Note]]:

keep away from children store. Do not enter, do not spray on objects that directly contact with food. If you accidentally enter your eyes, rinse with clear water immediately and seek medical advice. When spraying, the aerosol can must be kept upright and the included angle with the horizontal plane must not be less than 45 °. Please store it at the temperature below 40℃, and keep it away from heat source and open flame. It is strictly prohibited to be exposed to the Sun, puncture or burn the jar. The net weight and gross weight change with the passage of time, which is a normal phenomenon of aerosol products. The attrition rate is ≤ 2%/year.