【 charging method 】

   1. Charging mode: USB charging, applicable voltage: 110V~240V  

   2. Turn off the switch, push out the charging pin and plug into the power outlet.
   3. It cannot be charged before the switch is off.
   4. When charging, the charging indicator light is on.
   5. Standard charging time is 8 hours.
                                                [points for attention]

 Never charge in an area with rated voltage over 240V, or it will fail.

Do not charge for more than 24 hours continuously, and do not charge when the temperature is below 0℃ or over 40℃, otherwise the battery life will be shortened.
Never flush the body with water or bring it into the bathroom, otherwise it will break down.
When airframe part dirty, usable soft cloth touchs take neuter lotion to brush to try. Do not rub with alcohol or gasoline.
When the product is in charge or in use abnormal conditions (such as odor, temperature, sound abnormal) should be immediately cut off the power supply, and stop using.

 Proper use and maintenance of electric shaver can not only achieve satisfactory shaving effect, but also extend the service life of electric shaver. Attention should be paid to the following aspects when using.

   1. Pay attention to the polarity of the dry battery or charger when installing and connecting the power, in case the motor reverses and damages the fixed and moving blades.
   2, shaving, should be fixed blade close to the face slowly push, to move against the direction of beard growth, let the beard smoothly into the mesh. If move along the beard, will overpower the beard, not conducive to the beard into the mesh.
   3, electric razors should not shave long beard, so every 4 days or so shave as well. If the beard is very long, you should first use a scissors or small scissors to cut the beard short, and then use an electric razor to shave off. If there is no push scissors or small scissors, should be used for multiple shaving, will first fixed blade (mesh cover) and beard into a vertical direction to touch the skin, beard shave a little shorter, then press the method of 2.
   4, with the electric razor scissors in use, should be the blade of the scissors and the face to maintain a vertical Angle to move forward, in order to shave the beard.
   5. In case of rolling stop during shaving, turn off the power and restart, and continue shaving after the motor rotation is normal.
   6, electric razor blade is very thin, not forced pressure to deformation or damage.
   7, battery type electric shaver, after use or long-term use should be taken out of the battery, lest the battery moisture leakage, causing unnecessary corrosion damage. Ac electric shaver, after use should be cut off the power supply, pull out the plug, to ensure safety. Rechargeable electric shaver can not make the power discharge too much, if there is insufficient battery should be charged before use, if not for a long time, also should be regularly charged (about three months).
   8, to regularly add a small amount of lubricating oil to the bearing part, in order to reduce wear. Non-wet electric shaver, do not wash with water or alcohol or other volatile chemicals. Non-stainless steel blade, if not used for a long time, the blade should be coated with a thin layer of oil to prevent rust damage to the blade.
   9, every time after using the razor, use a small brush to clean the beard hair and other dirt, do not let dirt pile up, otherwise there will be motor stuck or blocked transmission phenomenon. At the same time, once the dandruff and oily skin solidify on the blade, it will affect the sharpness of the blade.

                                【Notice for receipt of goods】 

   2. The goods, please be sure to keep the cell phone and other contact information, such as for personal reasons (phone, no one answered, address, telephone, errors, and to express their unreasonable demands) lead to the goods returned, our shop will not accept liability for any damaged products, color box, if so, we will charge as compensation.

Notice for receipt of goods

                                                【 charging method 】

   1. Charging mode: USB charging, applicable voltage: 110V~240V  

   2. Turn off the switch, push out the charging pin and plug into the power outlet.
   3. It cannot be charged before the switch is off.
   4. When charging, the charging indicator light is on.
   5. Standard charging time is 8 hours.
                                                [points for attention]

 Never charge in an area with rated voltage over 240V, or it will fail.

Do not charge for more than 24 hours continuously, and do not charge when the temperature is below 0℃ or over 40℃, otherwise the battery life will be shortened.
Never flush the body with water or bring it into the bathroom, otherwise it will break down.
When airframe part dirty, usable soft cloth touchs take neuter lotion to brush to try. Do not rub with alcohol or gasoline.
When the product is in charge or in use abnormal conditions (such as odor, temperature, sound abnormal) should be immediately cut off the power supply, and stop using.

 Proper use and maintenance of electric shaver can not only achieve satisfactory shaving effect, but also extend the service life of electric shaver. Attention should be paid to the following aspects when using.

   1. Pay attention to the polarity of the dry battery or charger when installing and connecting the power, in case the motor reverses and damages the fixed and moving blades.
   2, shaving, should be fixed blade close to the face slowly push, to move against the direction of beard growth, let the beard smoothly into the mesh. If move along the beard, will overpower the beard, not conducive to the beard into the mesh.
   3, electric razors should not shave long beard, so every 4 days or so shave as well. If the beard is very long, you should first use a scissors or small scissors to cut the beard short, and then use an electric razor to shave off. If there is no push scissors or small scissors, should be used for multiple shaving, will first fixed blade (mesh cover) and beard into a vertical direction to touch the skin, beard shave a little shorter, then press the method of 2.
   4, with the electric razor scissors in use, should be the blade of the scissors and the face to maintain a vertical Angle to move forward, in order to shave the beard.
   5. In case of rolling stop during shaving, turn off the power and restart, and continue shaving after the motor rotation is normal.
   6, electric razor blade is very thin, not forced pressure to deformation or damage.
   7, battery type electric shaver, after use or long-term use should be taken out of the battery, lest the battery moisture leakage, causing unnecessary corrosion damage. Ac electric shaver, after use should be cut off the power supply, pull out the plug, to ensure safety. Rechargeable electric shaver can not make the power discharge too much, if there is insufficient battery should be charged before use, if not for a long time, also should be regularly charged (about three months).
   8, to regularly add a small amount of lubricating oil to the bearing part, in order to reduce wear. Non-wet electric shaver, do not wash with water or alcohol or other volatile chemicals. Non-stainless steel blade, if not used for a long time, the blade should be coated with a thin layer of oil to prevent rust damage to the blade.
   9, every time after using the razor, use a small brush to clean the beard hair and other dirt, do not let dirt pile up, otherwise there will be motor stuck or blocked transmission phenomenon. At the same time, once the dandruff and oily skin solidify on the blade, it will affect the sharpness of the blade.

                                【Notice for receipt of goods】 

   2. The goods, please be sure to keep the cell phone and other contact information, such as for personal reasons (phone, no one answered, address, telephone, errors, and to express their unreasonable demands) lead to the goods returned, our shop will not accept liability for any damaged products, color box, if so, we will charge as compensation.

Notice for receipt of goods