Watch maintenance
Middle and high grade watches suggest that every two to three years should do the corresponding maintenance, replacement of waterproof components, detection of travel time performance and power consumption of the movement, cleaning the movement, as well as maintenance appearance, such maintenance service will effectively extend the use of your watch time.
(1) when wearing a watch, the sweat on the hand is corrosive to the case, the steel case is due to nickel chromium alloy, corrosion resistance performance is better, half steel case is copper, long-term contact with sweat, easy to corrosion, should often use soft cloth wipe off the sweat or pad plastic table support, to prevent its sweat erosion.
(2) do not open the back cover of the table, so as to avoid dust into the movement of the normal work of the watch.
(3) do not put the watch in the wardrobe with mothballs, lest the table oil deterioration
(4) do not put the watch on the amplifier, stereo, television, in order to avoid magnetization.
(5) long-term storage do not wear the watch, should be regularly wound once a month, automatic movement of the watch should gently swing back and forth for a few minutes or wear on the wrist for a period of time to make it automatically wound. Make the parts do not stay in a static state for a long time to ensure the performance of the table machine.
(6) ordinary mechanical watches by the tide, can be dry cotton pressure on the watch, then use40The watt bulb bakes5Minutes, the moisture inside and outside can all be evaporated. If the quartz electronic watch by the tide, a number of small pieces of calcium chloride, wrapped with gauze; Then open the cover of the electronic table, the package of calcium chloride and electronic table into an airtight plastic bag or glass bottle, sealed. general3About an hour can divide the tide, make electronic watch return to normal. For serious damp table can be appropriately extended moisture absorption time.
(7Received a beloved watch, remove the outside packaging, do not want to save the packaging box used by the protection watch. These protective watch packaging box, can not normally wear to give the most safe protection of the watch, to avoid the watch was broken or by the collision, so the box is absolutely necessary to keep the packaging, and it is recommended not to wear the watch on weekdays, a habit into the box, can greatly reduce the probability of watch damage.
(eightUsually it is best not to wear the same watch every day, should be prepared for several different watches used alternately, in addition to enrich the personal modeling, but also to avoid dust, body scale all concentrated on the same watch. For the leather watchband, more careful care, so as not to cause watchband everyday regular wear and tear, so even if the surface of the new, the watch will look very old.
(9Wear a watch on the wrist to sleep, if the watch is a luminous watch, it will bring adverse effects to the body. This is because the luminous table pointer and dial coated on the luminous material, mainly is the mixture of radium and zinc sulfide, radium emitted rays can stimulate zinc sulfide crystal luminescence, sleep, if wearing a watch, the human body will be exposed to eight to nine hours of radium radiation, has certain harm to the human body. Therefore, before going to bed, it is best to take down the luminous table and put it on the table.
(10) facelifts. Watch has been marked a lot of lines, can be in the table on the first drop of water, then squeeze a little toothpaste wipe, you can take out the lines and make the table as new.
Note: identification of copper case
The case according to its material has a gold case, steel case, aluminum case, copper case, titanium case, alloy case, plastic case, wood case. Usually we contact, use and choose the most is all steel watchcase and watchband watch. But you may not know, there are a lot of billed case material is all steel watch is actually copper case. (also known as half steel watchcase) copper watchcase (also including watchband) relative to all steel watch, the manufacturing cost will be several times lower, there is more profit space. So a lot of businesses are going to make a big deal out of this,\"Bronze imitation steel\"Lure a buyer's attention with a very low price. Therefore, in particular, the whole steel table and half steel table distinction method to make a simple introduction:
a., all steel case coating bright in dark, round case edges and corners, no sharp sense. Copper case coating bright white, the surface of the back of the ear sharp edges, the surface of the back of the ear can be generally clear to see the cutter cut after the formation of the ring pattern. And the grain depth and size are different, the arrangement is loose and sparse. And the grain of the steel case is fine and symmetrical, close and tidy.
b, in the corner of the ear part (can be in the surface of the back of the ear inside the test) with a knife in a short distance gently scraping, such as its internal yellow is a copper case.
cCopper case corrosion resistance is poor, such as maintenance improper use after a period of time easy to fade (yellow or red), coating foaming or peeling phenomenon

Lovely stereo watchband suits little girl to wear very much, be about to be this year 61 children's festivals can be hot sell article!