Chat
MAG MAGTOOLS red, gray, silver, black, and blue transparent auto sealant pads
| Packaging information: |
|
|---|
Product description:
Sealant, the introduction of advanced production technology from the preparation. Single component, high sealing strength, good high temperature resistance, durable weather resistance, no sagging, good oil resistance, no corrosion, no irritant gas, no shrinkage of curing material, easy to peel off colloids, environmental protection and non-toxic. It is not limited by the size and shape of the bonding surface. Can replace a variety of rubber pad, asbestos pad, cork pad and paper pad, can effectively prevent water, oil, gas leakage, with a good sealing leakproof effect.
Application scope:
This adhesive can replace a variety of rubber pad, asbestos pad, cork pad and paper pad, can effectively prevent water, oil, gas leakage, with good sealing effect. It is suitable for plane seal, pipe joint, cover joint surface seal of engine, gearbox, oil tank, electromechanical equipment, electric appliance, instrument, electronics and chemical equipment of machinery, automobile, motorcycle, tractor, ship.
Instructions:
1. Clean the water, dust, oil, rust and other dirt on the surface of the bonded material;
2. Puncture the tube nozzle with the cap, apply the gel evenly from the outer edge to the inner edge with a thickness of about 1.6-3.2 mm, with a good sealing degree;3. About 10-20 minutes after coating, when the film surface reacts, align and apply pressure to tighten the two sealing surfaces;
4, at room temperature of 25℃ placed for 10 hours or 24 hours after use, the sealing effect is particularly good;
5, do not use up the colloid, after using the need to cover the tube cover, after the operation with water wash, and clean the tool. Precautions: 1. Keep the workplace ventilated and avoid contact with children;
2. Wear leather gloves during operation. If skin or eyes are touched, wash immediately with clean water or seek medical advice;
3. Store in a cool, dry, ventilated place away from high temperature;
4. Before using in batches, please do experiments to avoid improper operation that may affect the bonding effect.
