◆ Product characteristics

1. Easy to use, knead evenly and then bond.

2. Plastic, you can imagine, you can be shaped as you want.

3. After curing, it has high strength, good hardness, no shrinkage and corrosion. It can be used for drilling, sawing, planing, milling, filing and painting just like the mended bulk materials.

4. Excellent adhesion, wide adhesion materials, can be used for stone, wood, ceramics, glass, cement, plastic and various metals.

◆ Scope of application

1. Repair, seal and plug leakage of automobiles and motorcycles: oil leakage, water leakage, steam leakage, joint leakage, exhaust pipe rupture and other situations can be completely repaired.

2. Installation and decoration industry: various metal, wood, plastic, cement products and other defects repair. On the construction of aluminum frame, door frame, stair protection board bonding, repair. The production of indoor and outdoor advertising signs, and the fixing of door plates. All kinds of chemical industry, gas, water supply, steam pipe plugging repair.

3. Mechanical design, stone manufacturing and industrial production: the splicing of various marble and marble, the mutual adhesion, self-adhesion, repair, fixation, polishing, drilling and painting between various mechanical parts and metals. Can be steel, iron, aluminum and other metal vessels, pipes and some parts of the leak holes, cracks, sand holes, defects, fracture, damage, filling repair and bonding. Can quickly make and copy parts, models, templates, fixing, repairing, sealing damaged screws, and various forms of installation and fixing in industrial production

4. Family: repair and reshape the damaged kitchen, bathroom appliances and furniture.

◆ Usage:

1. Clean up paint, floating rust, dust, oil stains and other floating objects around the place to be repaired.

2. Take out the gel in the plastic tube, cut off the required amount, and knead the two materials with different colors in the gel thoroughly (about 1-2 minutes) until the color is even.

3, in 3 to 5 minutes to cover the repair place and try to squeeze into the holes and cracks, with hand water to smooth the surface.

4. The mixed gel will react quickly. After 10-20 minutes, it will start to harden.

5. When used in cold areas in winter, the colloid and the surface to be repaired should be properly heated to room temperature or slightly higher than room temperature if possible to speed up the curing speed.