Product specifications

product specification

material and maintenance

Material and maintenance

fa lang guo matters needing attention:

1. Use this product for the first time, use warm water and neutral lotion to clean it carefully.

2. Daily use neutral or special lotion products to extend their service life.

3. Avoid sudden temperature change. When the temperature of the pot is high, it is not easy to pour cold water immediately or put the pot in cold water to prevent the enamel layer from falling off.

4. Avoid excessive heating. This product has extremely strong thermal conductivity, and high temperature heating will make the pot body over-heated. It is recommended to use low and medium fire heating.

5. Please wipe it clean as soon as possible after use, and place it in a ventilated place. Do not place it in a damp place for a long time.

6. Excessive bumps are strictly prohibited to prevent enamel layer damage.

7. Try to use wooden or silicone spatula, avoid using metal spatula and steel ball, so as not to scratch enamel and affect the service life of the pot.

8. Because enamel pots are made of sand molds, when molten iron is poured into the mold, a large amount of gas will be generated, so the finished product may produce trachoma pores and so on. The enamel pan layer is sprayed upside down, so the pot edge
Some of them are silver gray iron, not a quality problem! After cleaning, you can apply vegetable oil stain proofing to the pot mouth.

9. The lid of the modeling pot is a complex and irregular structure. During the firing process, heterogenetic gravity will be generated, resulting in a certain gap between the pot body and the lid, which is normal and does not affect the use,

Please rest assured that. If you mind the above situation, please choose carefully!