Product Description:

1. The shell is made of stainless steel and colored spray painting material, which is beautiful and hygienic.

2. Microcomputer controlled, LCD display, adjustable in hardness as needed.

3. Use a full-enclosure compressor from a well-known foreign brand, using refrigerants R22/R140a/404a.

4. High-efficiency and powerful rapid freezing evaporator, with rapid cooling and excellent low-temperature performance.

5. Our company offers a variety of products with different voltages and frequencies to meet customer needs.

（如：110V/60Hz,220V/60Hz）

Product Introduction:

• Original brand energy-saving compressor
• Can adjust the hardness at any time, digital display, grade control, up to the maximum40level
• Intelligent start-up time adjustment, digital display,3-9Adjustable in minutes
• Digital display, sensitive control, intelligent computer control board
• This product is certified.China ElectronicsCertification

 【Production Method】：

(1) After placing the prepared ice cream batter (please strictly follow the mixing ratio required by the ice cream powder instructions), let it stand for half an hour, then pour the batter into the top bucket of the ice cream machine. Make sure the batter does not clump. (2) Press the automatic button to start the machine and enter the automatic working mode. You can also press the cleaning button first, wait for the batter to be fully mixed, and then press the automatic button (cleaning the machine should not take too long (1 minute)).
（3）In various processes, the digital screen automatically reflects the refrigeration process, and the machine automatically stops when the set temperature is reached.
（4）When taking ice cream, take an egg cup or a cup and place it under the discharge valve at the outlet. Press the discharging handle to squeeze out ice cream, and push the handle back to close.

【Daily Maintenance】∶

AThe cleaning of the refrigeration cylinder.
To ensure the health of ice cream consumers and to extend the service life of machine parts, you must clean the refrigeration tank once a day.
Press the cleaning key to drain all the slurry in the batch tank, and then press the stop key.
(2) Add an appropriate amount of disinfectant to warm water and pour it into the feed tank, making sure the water volume in both tanks is the same.
Press the cleaning key for about five minutes to stir, then discharge the cleaning liquid.
Rinse with clean water 2-3 times, then stop the machine.
(5) Turn off the power and clean and repair all parts.
a. Loosen the four screws on the side of the liquid valve, and remove the liquid discharge valve assembly.
b. Remove the handle locking pin, handle, valve rod, and seal ring from the discharge valve in turn.
c、Remove the stirrer from the refrigeration tank and remove the sealing ring.
Clean all parts removed, and replace any damaged parts in time.
e、Reassemble the parts in the reverse order of disassembly.

B、Clean the body of the machine
Consumers need beautiful and clean machines. Please keep the exterior of the machine clean at any time. You can use a warm cloth to wipe the body to remove stains, but do not use water to wash, to avoid electrical failures.

C、Clean the condenser
After working for a while, the condenser will be covered with dust, affecting heat dissipation and the refrigeration effect, and it must be cleaned once every six months. It is best to have a professional cleaner clean it. Before cleaning, turn off the power, and do not damage the fins of the condenser.
D. After a long period of machine use, the conveyor belt of the mixing system may stretch, requiring adjustment. It is best to have a professional person adjust and replace it. Before adjusting the belt, it is necessary to stop the machine and turn off the power. The belt should be adjusted to be tight enough.

【Ingredients of Ice Cream】:
◆ Ice cream powder is the most widely used and the most common type of ice cream ingredient. Currently, there are many brands and varieties of ice cream on the market, with different prices. Ice cream powder is generally mixed with water in a certain ratio. Because there is no need for a aging process, it is relatively convenient to use, and it is easy to transport and store, with lower costs. However, attention should be paid to hygiene during the mixing process to avoid secondary pollution.

◆ Fresh milk; the general shelf life is about one week, excluding production and transportation, etc., to arrive.

 【Ice cream powder making method】：
1. Take a clean container and add an appropriate amount of drinking water (based on weight: the ratio of powder to water is 1:3), then slowly pour the ice cream powder while continuously stirring to mix well.
2. The ice cream paste that dissolves in water must be allowed to stand at room temperature for 15 minutes before being poured into the ice cream maker (Note: If the standing time is insufficient, the ice cream powder produced will contain ice crumbs, affecting the taste).
3. Pour the batter into the soft-serve ice cream machine, and start the machine after confirming that the batter is flowing into the mixing tank. It will take approximately 10 minutes to be ready to eat.