◆ I. Product characteristics

1. Easy to use, knead evenly by hand to bond.

2. Great plasticity, as you can imagine, you can set the shape with you.

3. After curing, it has high strength, good hardness, no shrinkage, no rust, and can drill, saw, planing, milling, file processing and spray paint like the repaired body material.

4. Excellent bonding capacity, with a wide range of bonding materials, it can be used in stone, wood, ceramics, glass, cement, plastic and various metals, etc.

◆ II. Application Scope

1. Repair, sealing and plugging of automobiles and motorcycles: oil leakage, water leakage, steam leakage and joint leakage due to sand holes and cracks in cylinder block, cylinder head, fuel tank, water tank, and oil and gas pipelines, the exhaust pipe rupture and other situations can be completely repaired.

2. Installation and decoration industry: repair all kinds of defects such as metal, wood, plastic and cement products. Bonding and repairing of aluminum frame, door frame and stair protection board on construction engineering. Making indoor and outdoor advertising signboards, fixing doorplates, etc. Plugging and repairing of various chemical, gas, water supply and steam supply pipelines.

3. Mechanical Design, stone manufacturing and processing and industrial production: splicing of various marble and marble, mutual adhesion, self-adhesive, repair, fixing, grinding, drilling and painting between various mechanical parts and metals, etc. It can fill, repair, and bond the leakage, crack, sand hole, defect, fracture, damage, etc. on containers, pipelines and some parts of various metal materials such as steel, iron, aluminum, etc. Can quickly produce and Copy parts, models, templates, fixed, repaired, sealed damaged screws, and various forms of installation and fixation in industrial production, etc.

4. Family: Repair and reshaping of damaged kitchen, sanitary ware and furniture.

◆ Use method:

1. Clean up the paint, floating rust, dust, oil stains and other floating objects around the place to be repaired.

2. Take out the colloid in the plastic pipe, cut off the required amount, and fully knead the two materials of different colors in the colloid by hand (about 1-2 minutes) until the color is uniform.

3. Cover the repair place with force within 3~5 minutes and squeeze it into holes and cracks as much as possible to smooth the surface with hands touching water.

4. The mixed colloid will react quickly. It will become hard after 10-20 minutes. After 1 hour, it can be drilled, polished, painted, etc.

5. When using in cold areas in winter, the colloid and the surface to be repaired should be properly heated to room temperature or slightly higher than room temperature if necessary to speed up the curing speed.