101 industrial grade tag gun: 3 steel needles in total

needle: needle length 3.5

matching: package matching 5000 hair gel needles suitable for AliExpress Amazon sales.

Tagging Gun
labeling machine

Tag Fasteners Installation
installation of fasteners
Step 1:Grip the gun handle
step 1: hold pikestaff tightly
Step 2: Insert either end of the tag pin connecting bar (T letter port) into the hole at top of the gun, push the pin into the slot as far as it will go on
step 2: insert either end of the label pin connecting rod (T letter Port) into the hole at the top of the gun and push the pin into the slot as much as possible.
Step 3: Release the handle,finish and begin use
step 3: Release the handle, finish and start using
Needle Installation
binder needle installation
Step 1: Set the white switch to 3 o'clock
step 1: Set the white switch to 3 o'clock
Step 2: Keep the needle slot and gun slot on the same horizontal line and insert
step 2: Keep the needle slot and gun slot on the same horizontal line and insert
Step 3:Set the white switch to 9 o'clock finish and begin to use
step 3: Set the white switch to 9 o'clock to end and start using
Attantion:
note:
1.When not use,protect the needle by the covering cap.
1. When not in use, use cap protection-pin.
2.Before taking out the tag pin,please grip the gun handle firstly,then take it out.Otherwise,it may damage the fittings in the gun
2. Before taking out the label pin, please grasp the pikestaff first and then take out, otherwise it will damage the accessories inside the gun