Product Name: FS-3188 [Origin]-suit

  retail customers: except Xinjiang and Tibet, all regions are freight of first stage weight yuan. Xinjiang Tibet freight of first stage weight 15. Continue to calculate according to the template provided by the courier company, and the order ordering system automatically calculates.

[Product details]]

[Attachment] charging cable, brush, manual
[Function] pogonotomy
[Charging] 220V 50Hz 3W external charging plug, 8 hours charging,
[Performance introduction] rechargeable electric shaver

1. This electric shaver with double-ring cutter head can make you clean faster, easier and more effective. The cutter head can be close to the face according to the uneven contour of the face, making you feel more comfortable when shaving.
2. The blade is automatically ground blade net. When the shaver is working, the blade and the hard alloy mesh cover are constantly ground, which can keep the blade sharp frequently.
3. For this model, please charge it for 8 hours before using it. If you don't use it for half a month, you must charge it for 8 hours before using it. Make sure that the rechargeable battery does not lose power and keep the battery capacity, in this way, you can prolong the life of the shaver.
4. The battery (1.2V) of this shaver is recharged for 500 times, and the capacity remains unchanged.
5. This shaver is a high-speed silver Palladium motor with long service life, low noise, high power and light vibration.

Shaving tips for using beard knife

     1. The cutter head should be thoroughly cleaned every four weeks. After removing the protective film frame, spray special detergent 5cm away from the grid frame, and then use small brush to remove beard and dirt in the cutter head later.

      2. Use small brush to clean the cutter head, and use small brush to clean protective film to avoid damage.

      3. After each shaving, take off protective film shelves, tap a few times on the plane and install them again.

      4. Protective film cutter head protection cover on the back cover after each use to prevent protective film damage.

      5. To ensure a high level of razor, we recommend that you replace the cutter head and blade Net sets every two years.

6. In order to maintain the service life of the battery in the machine, razor is completely discharged during normal use every six months, and then recharged.

7. Because the face will expand slightly after washing face, it is good to pogonotomy before washing face, and it is an ideal time to pogonotomy before washing face after getting up in the morning.

8. When using the protective film Shaver, keep the shaver perpendicular to the face and hold the razor at a right angle of 90 degrees.

9. Because the beard grows downward, reverse scraping can make beard stand upright, which is easy to scrape clean, so reverse scraping should be done from bottom to top at pogonotomy.

10. When shaving, tighten the skin by hand. Do not push the cutter head hard. Just slide gently over the Hu District to clean the beard.

[Charging method]]

1. Be sure to use AC 220V/50Hz to charge
2. Turn off the switch, push out the charging pin and insert it into the power socket.
3. When the switch is not closed, it cannot be charged.
4. When charging, the charging indicator light is on.
5. The standard charging time is 8 hours.
[Precautions]]:

  do not charge in areas where the rated voltage exceeds 240V, otherwise it will fail.
Do not charge continuously for more than 24 hours, and do not charge when the temperature is lower than 0℃ or higher than 40℃, otherwise it will shorten the battery life.
Do not use washer body water or bring it into the bathroom for use, otherwise it will break down.
When the body is dirty, you can use a soft cloth to apply neutral lotion for a test. Do not use alcohol or gasoline to wipe.
When abnormal situations (such as smell, temperature and sound abnormality) occur during charging or use of the product, the power supply should be cut off immediately and the use should be stopped.

Correct use and maintenance of electric pogonotomy knives can not only achieve satisfactory pogonotomy results, but also prolong the service life of electric pogonotomy knives. Pay attention to the following aspects when using.
1. When installing the power supply, pay attention to the polarity of the dry battery or charger to prevent the motor from turning upside down, thus damaging the fixed blade and moving blade.
2. At pogonotomy, the fixed blade should be pressed tightly against the face slowly, and the beard should move against the growth direction, so that the beard can enter the mesh smoothly. If you move along the beard, it will overwhelm the beard, which is not conducive to the beard entering the mesh.
3. Electric shaver is not suitable for shaving long beard, so it is better to shave every 4 days or so. If the beard is long, you should cut it short with trim or small scissors first, and then shave it off with an electric shaver. If there is no trim or small scissors, you should use multiple shaving methods to touch the skin vertically with the fixed blade (mesh cover) and beard, and shave the beard shorter, then proceed according to the method of 2.
4. When the electric shaver with trim is in use, the blade of trim should be moved at a vertical angle with the face to clean the beard.
5. Once the rolling stop occurs at pogonotomy, turn off the power supply and restart it. After the motor rotates normally, continue to pogonotomy.
6. The fixed blade of the electric shaver is very thin, and it cannot be deformed or damaged by forced pressure.
7. For dry cell battery electric shavers, take out the battery after use or long-term lay up to avoid unnecessary corrosion and damage caused by moisture and leakage of the battery. AC type electric shaver, after use should cut off the power supply, pull out the plug, to ensure. Rechargeable Electric Shaver cannot discharge too much power. If the battery is insufficient, it should be charged first and then used. If it is up for a long time, it should also be charged regularly (about three months).
8. Add a small amount of lubricating oil to the bearing part regularly to reduce wear. Non-wet electric shaver, do not wash with volatile chemicals such as water or alcohol. If the blade of non-stainless steel material is not used for a long time, a thin layer of oil should be applied to the blade to prevent rust from damaging the blade.
9. After using the shaver each time, use a small brush to clean up the dirt such as fringe, and do not let the dirt pile up. Otherwise, the motor will be stuck or the transmission will be blocked. At the same time, shavings and greasy skin will affect the sharpness of the blade once it is cured on the blade.

Specific preferential price

please contact customer service WeChat

Specific preferential prices
Please contact customer service WeChat or Mobil

large quantity is more favorable

If the order amount or quantity of products you purchase is large
We will offer greater concessions and discounts.

Procurement Support policies of foreign trade companies
 

Registered capital: 10 million yuan

Registered capital: 10 million RMB

since 1978

contact us:

CONTACT US:

please scan the QR code above and add wechat

Please scan the two-dimensional code above and add WeChat

the following is the text

The following is text Word:

the following number, long press the number, can be copied

(The following number

long time press

  can be copied)

email:

2225179207@qq.com

phone/Huixin same number (more favorable):

13395895903

Mobile phone/WeChat

is the same number

(lower price):

13395895903

WhatsApp ID:

15215891949

from 10% off for a large number of good products, please add more low-priced products and discounts to Huixin photo album! Daily new products, brand discount tail goods, foreign trade export domestic wholesale,

folding washing machine, air fryer and other small household appliances, daily necessities, clothing, underwear, shoes, thermal underwear, tableware, melamine tableware, etc.

A large number of good goods are 10% off, please add WeChat, in WeChat photo album! Daily new, brand discount tail goods, foreign trade export domestic wholesale
Folding washing machines, air fryers and other small household appliances, general merchandise, clothing, underwear, shoes, thermal underwear, tableware, melamine tableware and so on

selected as diamond member of Yiwu shopping platform

Selected as a diamond member of Yiwugo.com

Selected in Yiwu shopping platform

highly recommended quality and integrity demonstration shops

Selected on the yiwugo.com platform

Key Recommended High-quality Integrity Demonstration Shops

selected platform

brand shops

Selected on the yiwugo.com platform

Brand shops

selected as a senior foreign trade supplier in Yiwu
Selected as a senior foreign trade supplier for yiwugo.com platform

won 《Rest assured to consume in Zhejiang"Logo

honest and law-abiding operation, customer-centered

Selected as "Rest assured consumption in Zhejiang", as a demonstration unit of integrity
Among them, Zhejiang refers to: Mainland China, Zhejiang Province

Product quality problems should be solved through negotiation. The products are taken in kind, because objective factors such as different light angles and displays will cause a little color difference, please understand.

Due to different shooting angles and manual measurement, a little error will occur. The actual product shall prevail. For more information, please consult online customer service.

The damage during transportation shall be borne by the buyer. The seller helped coordinate logistics matters.

Because the cost of raw materials and the spot quantity of warehouses change in real time, all prices, pictures, text descriptions, delivery time and other information are for reference only,

not as the actual order payment voucher, the specific price and inventory quantity shall be subject to the information confirmed by the sealed contract.

Please contact customer service for confirmation

the freight shall be borne by the buyer, and the seller shall fill in the freight plus labor cost quota. Most of the other items are miscellaneous items. If there is an online order, it will be deemed that any miscellaneous items or defective item or defective products can be received, our products will not be returning & amp; Exchanging supported once sold (please confirm the samples and quality face to face. If the products are not confirmed on site, direct payment will be deemed to accept the delivery quality). All quality standards are subject to the samples, A slight flaw (such as rust, scratches, dust, mildew, etc.) is normal. If the sample is not confirmed, the quality of the large goods is deemed to be recognized.

Any information not confirmed by the sealed contract shall be invalid.

If you see this information or place an order, you agree to the above information terms by default.