"Operating instructions"

After the battery is properly loaded, remove the protective cover, position the electronic scales stable, wind-free surface:

1. press open key, wait for 3 seconds to display 0.00;

2. the items will need to be weighed is placed on the tray when the unit symbol stops flashing when the weight of equipment

3. press the "m" key to select the units you want g/TL/CT/oz

4. press "t" can force the return to zero;

"Considerations"

★ Scale body placed in a smooth, no wind, vibration-free environments

☆ Use do not exceed the maximum load to avoid permanent damage to the sensor, do not shock when placing the tray, gently.

★ Use within the scale body 50cm please do not use mobile phones, electromagnetic signals that may affect your use of

☆ When the screen displays "Lo" symbols, please replace the battery

★ Appears when weight pallet weights in excess of rated "o Ld" symbol, please immediately remove overload

☆ When you are not using, please remove the battery, for safekeeping.

Correction method:

CAL appears hold down the m button for a few seconds, and then press the m key and then 100.0

Flashing, then put 100g on the standard weight, there PASS can

(Note: must-have a standard weight of 100 grams can be corrected)