Net Weight: 215g

● Category: cutting and carving bumper stickers

● Size: 200 * 25CM

● material: domestic material BK material (if you need to import KK, reflective material, please contact Customer Service) high temperature resistance, anti-fouling UV coating on the surface, full of luster, texture such as car paint, waterproof and sun protection, no fading, car wash waxing does not affect, tear it off without leaving residue

glue, no damage to car paint, delivery transfer film; (default material)

  color: Black White Blue Red

installation method:

1. Installation method of transfer membrane stickers with transparent light-duty vehicle (dry stickers):

1. Clean the car body and keep it dry.
2. Determine the position to be pasted. Under normal circumstances, slowly stick it on one side, scrape it with tools, and peel the bottom paper.
3. If the figure is really small, you can also tear off all the transparent transfer membrane and stickers and paste them. But care must be taken to avoid accidental adhesion.
4. After pasting, repeatedly scrape and press it several times. Tear off transparent transfer membrane.
5. Use art knife to draw a knife on the car door and the car seam, and cover the door inside.
6. Do not let bumper stickers and the car body have any separation or bulge.

II. Installation method of large transfer membrane with transparent bumper stickers (wet paste method):
Tools: dishcloth, sprinklers, scraper or credit card

1. Clean the car body and evenly sprinkle water on the part of the car body to be pasted-to reduce the viscosity of the sticker and facilitate the adjustment of the position.
2. Determine the position to be pasted. Slowly stick it on one side, gently scrape it with tools, and peel the bottom paper.
3. In case of door handle or anti-scratch strip, cut the materials and wrap them in according to the situation.
4. Adjust appropriately. After making sure that the graphic approximate location is correct, wipe off water and bubbles repeatedly. Tear off transparent transfer membrane.
5. Use art knife to draw a knife on the door and seam, and pack natural inward.
6. Do not let bumper stickers and the car body have any separation or bulge.
7. Try to dry the water in bumper stickers, and heat and dry it moderately if necessary. According to the weather, wash the car in a day or two.

In order to reduce the installation difficulty of customers, the bumper stickers provided by us have been covered in advance by transfer membrane. (Except for whole continuous graphics)

how to clear:

gently scrape the edge of the sticker with your nails and tear it off completely without leaving marks or hurting the car paint. If the corner cannot be blown up in cold weather in winter, the laminating film can be properly heated by hair dryer, and the glue can be easily removed after being soft.

Precautions:

1. Don't wax one week before you decide to pretend to be your car. Wax will make the sticker stick firmly. Do not wash the car within three days after bumper stickers is pasted. Don't paste it on rainy days. This will not work well!

2. If the sticker needs to be attached to the door crack or other places that need to be moved, don't worry. After sticking it, cut it with a quick knife.

3. If you really don't want to do it, please go to the local Post solar film to ask for help.