This Packer organism and pliers set is a set
usage:1. Place the Packer flat on the package body, and move the rear body to the rear top with the lower lift handle.

            Handle paper bag or plastic tape ( packing belt for short) on the package, one end of the packing belt is pressed under the front presser foot, the other end is pressed under the back presser foot, and then the left and right swing handle binds the package tightly.

                  Cut off the extra packing belt with a knife, put iron buttons on the joint of the packing belt, and then clamp them on the buttons with pliers to concave and convex shape.

                  Lift the handle backward, lift the foot plate and press the foot. The front and rear presser feet are separated from the gear by the handle pressure, and then lift the front presser foot handle. At this time, the Packer and packing belt have all been loosened, the fuselage can be removed.

Product maintenance: it must be kept clean frequently and filled with lubricating oil regularly..