Chat
Rongsheng Car Supplies Tripod Warning Sign Reflective Reflective Parking Warning Signs Safety Stop Sign
| Packaging information: |
|
|---|
Product Size: width 42.5cm * height 42.5cm (1-2cm measurement error)
product Weight: 0.6KG
[Product introduction]]
when the car is on the road, it is inevitable that it needs to stop at the roadside urgently. At this time, this thing is useful, no matter during the day, at night or when the weather is bad, as long as you put it in the distance of several meters behind the car, you can warn the vehicle driving from behind in advance. Because it is reflective, it is very bright and eye-catching when there is light warning sign at night, I saw it all the way. Folding reflective triangle warning signs can be folded together when not in use, which is convenient to carry. When in use, it can be opened and placed behind the car, which is a safety product for you to drive out.
2. Strong reflection within 500 meters
3. Passed EC ECE-R27 certification
4. Passed the BGA184-1999 standard of **Department
5. Passed the CMVDR127 certification of the Economic and Trade Commission
6. Implement GB19151-2003 standards
[Instructions]]
1. When using, take out the faulty car in the box to warn signboard, hold the bottom and open the support on both sides of the bottom respectively. Place the open signboard on the ground, pull up the left and right reflector, and insert the pin on the left reflector into the bottom of the open slot on the right reflector.
2. Place the open fault car warning signboard reflective facing the direction of the incoming car behind the fault car. The placement angle is signboard vertical plane and the vertical plane of the tail are 5 ° left, the ordinary highway is placed 30~100 meters behind the faulty car, and the expressway is placed 100 meters behind the faulty car.
3. When you stop using it, withdraw about reflector and support in the reverse order of opening it, and then put it into the box. Pay attention to protect the red reflective surface and fluorescent surface when charging signboard, and avoid scratches. When connecting and disassembling about reflector, push in or pull out along the direction of the slot to avoid damage to signboard.
| Shop Details: |
|
|---|