Home Handheld Portable Mini Manual Sewing Machine Handheld Pocket-sized Travel Sewing Machine Packing Quantity: 200 pieces Packaging: Color Box Case Size: 47*30*59 cm Volume: 0.083 cubic meters

 Manual Mini Sewing Machine Correct Usage Method:                         

1、Holding the device: Hold the machine base with the four fingers of your right hand, with your thumb naturally resting on the top cover of the machine, to hold the entire machine steady.

 

2、Threading: Gently pull the thread from the spool. Then pass it through the guide coil. Temporary place the thread end next to the machine needle, and then pass the threader through the needle hole from the front of the machine (towards the body junction). Then, lead the thread end into the small hole of the threader, and withdraw the threader, pulling the thread head out about 2-3 centimeters. Press the thread onto the pressing plate to use it.

 

3、Unfold the cloth:Use the index finger of your right hand to lift the press plate, place the fabric (thickness no more than 0mm) that is ready to be sewn flatly under the press plate, and gently replace the press plate to press the fabric;

 

4、 Sewing Operation:Hold the fabric with your left hand, and with your right thumb, press the top of the cover quickly and firmly to the bottom. Then, press down again with your thumb, and repeat this process. The feeding mechanism will automatically move the sewn item to the left. With your right hand, move the machine gradually to the right, and with your left hand, hold the fabric and move the sewn item to the left gently in sync with the sewing rhythm until the sewing is complete. Cut the thread with scissors, gently pull up the press plate to remove the fabric. From the back side of the sewn fabric, pull out a section of thread at the end, thread it through the adjacent loop, pull it tight, and tie a knot, and the stitch will be secure. When sewing is complete, do not pull the fabric hard to break the thread, to avoid damaging the sewing needle or the stitch.

 

6. This function can automatically feed the fabric and adjust the tension between the stitches.But pay attention to the following points: if the needle is too tight, adjust the pressure nut slightly counterclockwise; if the needle is too loose, adjust the pressure nut slightly clockwise; make sure the needle is tight. If you need a larger needle, you can pull the cloth slightly faster with your left hand. If you need a denser needle, you can pull the cloth slightly slower with your left hand;

 

7、Change Line GroupIf you replace the large spool with a larger one, you can connect the spare extending rod to the spool shaft and insert the larger spool. Place the spare plastic cap at the end of the rod to fix the larger spool, and then re-thread the line, adjust the tightness of the line, and then sew; the effect of using cotton or synthetic thread.

 

8. Change NeedleLoosen the fixed screw and remove the broken needle. Replace the new needle, making sure to align the flat side of the needle with the fixed screw, and do not install it backwards. This miniature sewing machine is manual operated and features automatic fabric feeding and adjustable tension between stitches, achieving professional results;