Instructions for use:

1. Clean the bottle body before using the new bottle, and check whether the seal ring is installed well.
2. Please Preheat (or pre-cool) with a small amount of boiling water (or ice water) before use.
3. After each use, clean it with hot water or cleaning solution and turn it upside down to dry.

Maintenance method:

to prevent the occurrence of peculiar smell or stains, please clean it after use and make it fully dry.

Physicochemical properties:

polycarbonate is an amorphous, tasteless, odorless, non-toxic and transparent thermoplastic polymer with excellent mechanical, thermal and electrical comprehensive properties, especially impact resistance, good toughness, small creep, product Size is stable.

Performance: it has good heat resistance and weather resistance, and can be at-30-120 ℃. Long-term use, Thermal Deformation temperature 130-140 ℃,145-150 ℃ without obvious melting point, melting temperature 220-230 ℃;

it has good electrical properties, making it easy to manufacture electronic components working at higher temperatures;

good light transmission performance, light transmittance is 85%-90%; Low water absorption, good coloring; Flame resistance conforms to UL specification, 94V-1 and 94V-2 standards, and belongs to self-interest resin.

Chemical resistance: stable to dilute acid, oxidant, reducing agent, salt, oil and aliphatic hydrocarbon;

non-alkali, ketone, aromatic hydrocarbon and other media, soluble in dichloromethane, dichloroethane and other chlorinated hydrocarbons;

long-term exposure to substances that are not resistant to turbidity and exceed the high temperature environment they bear will produce certain stress response.

Usage

1. Clean the Cup with clean water before use to remove the dust entering the product assembly process;

2. When the lid is opened, you may ask a little smell of silica gel, which is the smell of the seal ring in the lid. If you soak it in boiling water for 2 minutes, it will disappear naturally. It is non-toxic. Please feel free to use it.

3. It is not easy to fill up with hot water. It is better to be 2cm away from the cup mouth. Tighten the cup lid to prevent scalding caused by collision;

4. This product is made of polycarbonate material with strong weather resistance, and can be used at minus 20-120 ℃;

5. If you are a tea lover, Please pour out the remaining tea in time after drinking tea every day to avoid tea stains;

6. Please wash the Cup with soft cotton cloth and wipe the food gently;

7. Don't put milk, carbonated and other drinks left.

Precautions

do not place the product in an open flame or near a high temperature, otherwise the texture of the product surface will be damaged;
without the guidance of the manufacturer, it is not allowed to conduct destructive tests on the product, otherwise it will damage the surface of the product or affect the function due to improper operation;
fill in hot water, please tighten the lid and place it out of reach of the baby to avoid injury or scald;
this product produces physical and chemical stress reaction on alkali, Amine, ketone and aromatic hydrocarbon substances; It has melting effect on dichloromethane and dichloroethane chlorinated hydrocarbon substances; It has corrosive effect on strong acid; Please place it separately, do not put food containing such substances into the product;
for refractory tea stains, please wash and wipe gently with food; Do not use non-food grade.