Gift box size: 5*2.7*27

1. How to operate the correct inflation

 1. Before inflating, use small tools to resist the inflation core, completely release the residual gas inside, so as to eliminate the pressure in the gas tank of the lighter;

 2. Press gas tank of the aerated outlet vertically down, every time5 it takes about two or three seconds.

 3. Please wait 3-5 it takes about minutes to use, such5 there is still no fire after minutes, please adjust the regulating valve larger. (Note+-) direction.

For more details, see the following details. If you have any questions, please contact online customer service or call manager he!

Special reminder: Altitude1000 in the plateau area above meters, inflatable windproof has an impact on the use of torch lighter. The ignition rate decreases by a large proportion, please carefully choose windproof torch lighter. Try to choose open flame and kerosene lighter.

2. Instructions for use of kerosene lighter:

  note: The New kerosene lighter does not contain oil and must be used on its own. This shop is available for sale. Click this link in the accessories kerosene column.

Refueling steps:

1. Open the machine cover;

2. Dial out the movement;

3. Turn upside down, open the bottom cotton cushion, or inject kerosene from the bottom cotton cushion hole.

4. After refueling is completed, insert the casing, which can be used.

5. Note that it is OK to pack 8 points, not too full overflow. Please pay attention to safety when starting the fire for the first time, because there may be overflow oil, causing the whole fuselage to catch fire.

  Special Reminder: the distributor cannot refuel when the kerosene lighter is not sold or used. First of all, after refueling and burning, cotton core will turn black and become the same as the old machine, which cannot be accepted by customers. In addition, if it is not used after refueling, the ignition rate will decrease and it will not be easy to start fire in the future.

  Corrosion inside the casing is a common normal phenomenon, which is caused by residual chemicals during surface working treatment. At the same time, we often insert and remove friction during daily use, at the same time, the more rough the internal structure is, it is conducive to the fastening of the movement and is not too loose. Therefore, we will not deliberately beautify the inside of the movement. If the movement is too loose during use, pull out the movement and gently knock the bottom of the movement side. It will be OK to load it again.

3. Charging lighter

currently, there are charging lighter electric stove wire and cigarette lighter arc pulse lighters in the market.

1. The charging time of charging lighter is about 2 hours. Generally, it is charged through the USB cable interface, which can universal phone charging plug. Some of them are equipped with USB Direct socket, which is directly charged through the computer.

2. Cigarette lighter can be about 2-3 packs.

1. Detailed inflatable introduction:

gas filling method

1. When adding gas, there must be no Mars or fire around, and ensure safety. Do not smoke while adding gas;
2. Qualified butane gas should be used, and inferior gas may damage the lighter or reduce the service life;
3. When filling the gas for ordinary models, please stand the lighter upside down, align the gas bottle outlet and cover the lighter air inlet, press it several times with force, and keep it for about 2 seconds each time; If the gas cannot be filled, it may be that there is excess air left in the Steam Box. At this time, you can deflate the air, and use a small screwdriver to immediately deflate the Air 1-2 times in alignment with air inlet, and then perform the air filling operation;
4. When the Langsheng machine is aerated, loosen the air inlet screw cover with tools such as a slotted screwdriver, and then follow the above steps. After the air filling is finished, the screw cover can be screwed flat, not too tight; Otherwise, the machine cover cover will not be dense and the Machine cover sound will not be crisp, and the gas will escape. Hardcover Langsheng machine should use special air nozzle to add gas; 5. When the gasoline engine is refueling, open the head cover, pull out and reverse the movement, open the outer sponge and add appropriate amount of gasoline. After the gasoline penetrates into the inner layer, cover the outer sponge, and then put it into the casing;
6. After all kinds of lighters replenish fuel, wait at least 1 minute to adjust the temperature of the newly filled gas to room temperature, and wait until the residual gas attached to the lighter is completely volatile before ignition. If the ignition operation is carried out immediately at this time, the residual gas on the surface of the lighter may burn, causing unnecessary danger. After re-supplementing the gas, if the flame height is too high or too low during use, it is normal, and the flame height can be adjusted appropriately.

Regulating flame
1. When using, as the gas content of the product decreases and the temperature of the surrounding environment changes, the flame height will change to a certain extent, which is a normal phenomenon. You can adjust the flame height moderately;
2. When using, the normal flame height should be controlled at; Windproof and direct punching lighters are 1.5-2.5cm; Langsheng, gasoline and open flame lighters are 2.5-4.0cm;
3. If you need to adjust the flame height, please use a screwdriver to align the flame regulator groove; If the lighter itself has adjustable ring, you can directly adjust it with your fingers to (-) the direction of the arrow is clockwise, and the flame height can be adjusted to low; The direction of the arrow is counterclockwise, which can increase the flame height. Note: rotate counterclockwise and cannot exceed half a circle based on the normal flame height. Otherwise, this product may be damaged;
4. The gasoline lighter should control the flame height by adjusting the ignition height of lamp wick. If the flame height is too high, scissors can be used to cut a little lamp wick; If the flame height is too low, lamp wick can be pulled out appropriately.

Precautions
1. Contain pressurized flammable gas, please stay away from children;
2. Do not puncture or throw a lighter, and do not throw it into the fire;

3. Please use it in a ventilated environment and pay attention to flammable items;
4. Fire head is strictly prohibited to face, skin, clothing and other combustible substances to avoid danger;
5. Please check the position of burner when igniting, and press the ignition appropriately. Lighters of different styles are ignited in different ways: they can be divided into straight beating, side beating and side beating; Gasoline engines should quickly rub grinding wheels, and Langsheng machines use thumbs to quickly rub rollers from right to left;
6. When using, if any impurities such as soot accidentally fall into burner, blow it in time to remove the sundries, otherwise it will cause bad fire;
7. Langsheng and gasoline lighters, for example, as soon as the Machine cover is opened, the gas starts to escape. Therefore, when the machine cover is not ignited, be sure to cover the Machine cover for storage;
8. This product is not suitable for lighting. Do not burn continuously for more than 1 minute to avoid scalding skin with high temperature;
9. Do not put the lighter in a high temperature environment (50 degrees Celsius/122 degrees Fahrenheit) for a long time, and avoid direct sunlight for a long time, such as the surrounding stove, outdoor closed unmanned carriage and trunk;
10. As the climate above 3000 meters above sea level limits the combustion conditions, the ignition of windproof and direct impact lighters may be greatly affected. We recommend that you use an open flame lighter;
11. When using arts and crafts lighters such as desktop lighters, the positions of burner, press, air inlet, and flame regulator should be clearly defined for correct use.
12. Qualified butane gas should be used. Inferior gas may damage the lighter or reduce its service life.

2. Instructions for use of kerosene lighter:

note: The New kerosene lighter does not contain oil and must be used on its own. It is available in the accessories category.

3. Introduction to charging lighter

1. Product introduction:

    rechargeable arc electromagnetic pulse lighter, environmentally friendly, clean and low-carbon electric energy for color replaces traditional gas and fuel energy, USB interface charging, recyclable, this product breaks through the limitation that "charging cigarette lighter" can only be used to light cigarettes, and can basically replace the use range of traditional lighters. It can produce arc sparks without electric shock to human body, it is only necessary to ignite the igniter when it comes into contact with the arc spark. It does not produce harmful gases to human body, and there is no flame. It is safer and environmentally friendly.

2. Product Description

     charging through USB interface can be connected to any charger whose output voltage is DC5V and output current is 1.0A, such as computer and mobile phone charger. It can be fully charged for 1.5-2 hours at a time, when charging, the red indicator light is on. After being fully charged, the indicator light is automatically turned off. After being fully charged, it can be used 100-300 times. You can click 6 packs of incense yai or use it for about a week.

Third, how to use it (as shown in the following figure)

4. Battery

    the color of this product uses a high rate of polymer lithium ion battery, which is checked by the high precision battery performance tester before use to ensure the safety performance of the battery. It has multiple protections such as overcharge, overdischarge, and overload. High capacity, quotient ratio.

V. Warning

   1. Do not put this product into water or other liquid, otherwise it will cause short circuit.

   2. Please disconnect the power supply in time after charging (generally the full charging time is 2 hours). Do not connect the battery that has been charged to the power supply for a long time. Overcharging will shorten the service life of the battery;

   3. When the battery power will be exhausted, the arc spark duration will be shortened. Please charge it in time. Charging it immediately before the battery is completely discharged will prolong the service life of the battery;

   4. Do not continue to ignite for a long time. We recommend that you do not use it for more than 10 seconds each time to prolong the service life of the product.

6. Maintenance

   1. Often wipe gently with soft cotton cloth to keep the luster of the lighter;

   2. After using for a period of time, the surface of electroplated metal will lose its luster, which is a normal phenomenon. This situation is more obvious after contacting with chemicals or in high temperature environment. We recommend that you purchase a professional "polishing tool" to wipe away dark spots;

   3. Paint surfaces with high gloss should be maintained carefully, because they are prone to scratches;

   4. Since the battery is based on the principle of chemical reaction, if it is not used for a long time, it is recommended to charge it every half a year to prevent the battery from over-discharge and affect its service life.

  Seven, plateau sharp weapon, burning to grassland, adapting to various altitude climate conditions, free ignition.

Eight, small size, exquisite and stylish, exquisite and beautiful appearance, elegant. Really high-end.