Grinder Wireless Rechargeable Exfoliating Calluses Pedicure Device Automatic Washable Pedicure Device in Stock Wholesale
Packaging information: |
|
---|
[Name] wireless charging foot grinder
[Material] APS + TPR + sand wheel head
[Output voltage/current] 5V/1A
[Color box size] 20.5*20 * 6.3cm
[Net weight] 360g
[Packing quantity] 40 sets/box
[Box gauge] 66*42.5 * 41cm
[Packing gross weight] 14.5/15.5kg
[Remarks] Dry and wash with water
general usage:
1. Remove the plastic cover of the hard leather roller before using.
2. Make sure that the roller of the skinning machine is firmly fastened to the device. Do not start without installing the peeling roller.
3. Turn the silver hoop to the left to start the device, and gently slide the hard skin removing roller on the hard skin, and the dead skin will be removed. The product can only be used for dry skin. Do not press strongly, otherwise the product will stop working.
4. Turn off the host and check whether the foot skin is as smooth as you expected. If the target has not been reached, start the device and repeat the above steps to achieve the desired effect. Warning: remember not to use the product on the same part for more than 3-4 seconds. If the skin becomes painful or inflamed, stop using it immediately.
5. Let your feet reply smoothly.
6. Turn silver hoop to the right to turn off the device.
7. Wipe or rinse the feet to clean up the excess dead skin.
8. Dry your feet thoroughly.
9. Massage moisturizing lotion to your smooth feet.
Tips:
1. This product must be used under dry feet! Foot bath and Bath will soften the old skin, but it is not conducive to polishing
2. It must be polished back and forth. If you stay in one place for a long time, the skin will quickly heat up and burn!
3. When you wear your feet, you only need to press it with light force so that it won't slide. You don't need to force it, otherwise it will cost more electricity.