1. Product Name: USB Type-C rechargeable soap dispenser mobile phone
2. model. LZD-V18
3. battery condition: a set of 3.7V /2000mAH 18650 rechargeable batteries.
4. Charging port: USB_TYPE-C ports,
5. charging rated voltage is 5V/0.5A
6. runing hour: Rechargeable the standby time of soap dispenser is more than 6 months. Under normal use, it can spray more than 5000 times after charging once.
7. Product Size: bottle capacity 600ML, size 112*76 * 210mm; Bottle capacity 350ML, size 112*76 * 178mm.
8. Product material: ABS.PET. Silica gel
9. PACKAGING ACCESSORIES: Host, USB charging cable, manual
10. features:

(1) This rechargeable soap dispenser has four gears, each of which corresponds to different liquid outlet time.

(2) press touch for a long time for 1.5 seconds to start, enter the first gear, turn on the green light, and the liquid output time is 0.5 seconds, and the sensor turns on the green light at the same time;

then press the bright blue light to enter the second gear. The liquid output time is 0.8 seconds, and the blue light is on at the same time;

then press the bright purple light, enter the third gear, the liquid output time is 1.1 seconds, and the induction will light the purple light at the same time;

then press the white light to enter the fourth gear. The liquid output time is 1.4 seconds, and the white light will be on at the same time;

then press the green light to enter the first gear, and the liquid output time is 0.5 seconds, so cycle;

press for 1.5 seconds, turn on the red light, and then turn off.

(3) after turning on the selected gear, reach below the sensor area (the sensing distance is 4-6cm) and automatically discharge liquid. If you need to re-discharge liquid, please re-reach below the sensor area.

(4) when adding liquid for the first time or re-adding liquid when the liquid is used up, it is necessary to sense 2-3 times to empty the air before the liquid can be normally discharged.

(5) If the red light is on at the same time when the liquid is discharged in different gears, the battery power is low, please recharge it before using it. The charging process of this machine is yellow light flashing, full of light yellow light.

(6) in the standby state, if the machine flashes a red light, the sensor is blocked by foreign objects. At this time, the sensor head area needs to be wiped clean before the machine can be used normally.

1. 11. Precautions:

(1) the rated charging voltage of the machine is 5V, and improper use of voltage may cause serious damage to the machine, burning internal electronic device.

(2) do not impact the machine strongly, otherwise it will cause serious damage.

(3) If you do not use this machine for a long time, please shut down and store it.

(4) Please do not tilt the fuselage to avoid liquid leakage.

(5) do not rinse the fuselage with water, otherwise it will cause damage to the product.

(6) normal operating environment temperature of this machine: 3℃ ~ 55℃.

(7) scope of use: hotel bathroom/wash basin, family bathroom/wash basin, public bathroom/wash basin, hospital bathroom, etc. All bathrooms/wash basin are universal.

1. 12. Product sensing distance: in the vertical direction, the infrared sensing distance is between 4cm-6cm.
2. 13. Product induction liquid Time:

first gear: The green indicator light is on, and the liquid output time is 0.5 seconds;

second Gear: The blue indicator light is on, and the liquid output time is 0.8 seconds;

the third gear: the purple indicator light is on, and the liquid output time is 1.1 seconds;

four gears: The white indicator light is on, and the liquid output time is 1.4 seconds;

12 product capacity: 600ml and 350ml.

13. Installation method: desktop