Aluminum Alloy Signature Pen 4-in-1 Multifunctional Laser Pen LED Light Screen Stylus Portable Guide Laser Light
Packaging information: |
|
---|
Product box cabinet: 35*33*29. 5cm Gross weight: 12KG quantity: 600 per piece
aluminum case there are blue/black/red/white/4 colors, please leave a message if you have color requirements, otherwise the color will be shipped randomly
material: aviation aluminum alloy battery: it adopts 3 AG13 button batteries, which are cheap and easy to replace. Range: more than 5 meters using ultra-high brightness New Technology light bulb, bulb operating life can reach 100000 hours, can easily illuminate the entire corridor, super energy saving. And can bring button batteries for a rainy day.
Note: the prices on all pages of this website are ex-factory prices excluding tax. If you need to issue an invoice, please contact Customer Service for tax increase.
I. Instructions for use
1. Check the battery: make sure the battery has electricity and install it in the correct direction like a flashlight;
2. Flashlight when in use, choose according to the requirements of flashlight on voltage and battery, do not use it indiscriminately, in case of burning circuit board, different models and different voltage batteries should not be used at the same time;
3. In use, when the brightness of the flashlight changes obviously, turn off the flashlight to prevent the battery from being over-discharged and charging in time. Pay attention to the waterproof, moisture-proof, drop-proof, etc, when charging, according to the charging speed of the charger, after the indicator light changes, take it out in time and do not overcharge;
4. If the battery is not used for a long time, the battery should be fully filled and maintained, and the battery should be replaced normally in about three months to avoid chemical corrosion;
5. Keep the inner wall of the lamp Cup clean, do not wipe it with hands or hard objects, clear the fingerprints on the lens, and gently wipe it with a cotton swab dipped in lens cleaner;
6. Do not contact the flashlight with sunshine, water, chemicals and corrosive gases for a long time to avoid damaging the flashlight;
7. Do not disassemble the flashlight for non-professionals to prevent damage to the circuit board.