Contact online customer service or call TEL: 18868554531 QQ: 2760179072 learn more about styles

the colorful wallpaper decoration effect is very obvious, which can make the room into a variety of atmosphere, and the cost is relatively friendly. What is the process of wallpaper installation and pasting,

how to paste self-adhesive wallpaper?

1. Before pasting wallpaper, use a brush to put wall surface brush of what you want to paste. Pay attention to the drying of the wall to avoid dust and moisture affecting the pasting effect. If the wall is uneven and there are concave holes, you must use soil to repair it, then scrape and prepare corresponding tools, some of which are equipped when buying wallpaper.

2. Use a ruler to measure the height of the wall to be pasted with wallpaper, and then start cutting wallpaper. When cutting wallpaper, try to leave about 5 centimeters more on each side, which is convenient for later processing at the corners. Note that if there are patterns on the wallpaper, pay attention to the stitching part of the later colored thread.

3. After cutting the wallpaper, you can pour basement membrane into the bucket, mix it evenly with clean water, and then evenly apply the mixed basement membrane on the wall. Pay attention to the removal of the wall and apply it.

4. Pasting is a key step. When pasting, it starts from one side of the wall and sticks in one direction. The first wallpaper is usually pasted on the door, and then separated sticker is pasted from top to bottom. When pasting, use scraper to scrape horizontally from one side to the other side to remove the gas below. It is bigger when separated by sticker, otherwise bubbles will easily appear when catching gas. Make the wallpaper flat and close to the wall. Then cut off the extra wallpaper at the upper and lower ends. After all wall sticker is finished, wipe the glue remaining on the surface of the wallpaper completely with sponge and then it will be OK.

5. After the wallpaper is pasted, the burrs around the wallpaper need to be cut. After leveling with Baffle, cut it with wallpaper knife. Pay attention to the cropping of the wallpaper section at doors, windows and power switches.