Main purpose

1. Furniture manufacturing industry: bonding Mercury lens, aluminum edge sealing, handle, Crystal scraper, marble, plate bonding, etc;

2, decoration industry: bonding and fixing various wooden lines, door casing, plaster line, floor tiles, decorative pendants and various wallboard projects, etc;

3. Exhibition Industry: bonding and fixing all kinds of calligraphy and painting, signs, acrylic, exhibition Gui production and so on.

4, cabinet door panel industry: bonding grain steel plate, etc.

This product is used to cover materials, wood, gypsum board, metal, mirror, glass, plastic, rubber, skirting board, shutter, threshold, window sill, boundary pile, Pillar, junction box, all kinds of artificial materials, ornamental stone the device and tile are fixed on concrete, brick, plaster, wall and coarse paper board.

clean the construction surface to ensure no oil or dust.

Cut the nozzle, install the nozzle, and squeeze out with a sealing gun.

I. Dry bonding method (suitable for light materials and joints with light bearing force)

1. Squeeze out several lines of "Zhi" font liquid nails at a distance of 40cm;

2. Press one side of the adhesive with liquid nails, gently pull it open, and let the glue volatilize for 2~5 minutes;

3. Then press the two sides tightly.

II. Wet bonding method (suitable for use with clamp tools only under large pressure)

1. Apply liquid nails according to the dry bonding method;

2. Cooperate with clamp, iron nail or screw, and immediately stick the two sides or nail tightly;

3. After the glue solidifies (24 hours), remove the clamp.

Bonding method of weight-bearing materials:

can directly bond the weight-bearing material. First, attach the weight-bearing materials together, then separate them, wait for drying for about 5 minutes, and press and tighten the materials to be bonded firmly again to put them in place. If necessary, it can be supported by supporting columns. (Heavy materials must be supported)

dry bonding method: (ceiling line, skirting line, door frame, background wall)

1. Extrude "Zhi" shaped adhesive along the adhesive surface

2. Squeeze the adhesive side to the surface to be pasted, and press the two sides tightly

3. Pull the two adhesive surfaces apart and let liquid nails strong glue volatilize for 2-5 minutes

4.2-5 minutes later, press again and tap along the joint.

5. Cancel the auxiliary fixation after 24 hours of temporary fixation with auxiliary tools.

The bonding effect can be achieved within 6.24 hours and completely cured within 2-3 days.

Wet bonding method: (wood floor, marble countertop and other large materials)

1. Apply liquid nails strong glue according to the dry bonding method

2. Press the bonding surface tightly, the bonding effect can be achieved within 24 hours, and the bonding effect can be completely cured within 2-3 days.

Fast adhesive Liquid Nails has ultra-fast adhesion, especially on many surfaces. As long as any surface is a multi-empty structure, rapid bonding effect can be achieved without any auxiliary device during the bonding process.