Motor forward and reverse rotation drive control module set

this package includes:

1. Remote control small peppers;

2. Motor forward and reverse driver module 1.

Long-term cooperation welcome to negotiate.

I. Product parameters

operating voltage: DC 3.6V ~ 24V
Maximum load current: 3A

static current: 3.6mA ~ 5.5mA

operating frequency: 433MHz(315MHz can be customized in batches)
Receiving sensitivity: ≥-107dBm
Output voltage: input DC3.6V ~ DC24V output DC3.6V ~ DC24V
Modulation mode: ASK (superheterodyne)
Appearance size: 30 mmx 13 mm x 4mm (length x width x height) mini size
Supported encoding format: 1527 learning codes

storage remote control: ≤ 4

working mode: Inching, self-locking, interlocking + stop function, code clearing

learning method: Button learning

operating temperature:-20~80 degrees

operation method:

clear the code pair: (clear the code before switching the mode)

  press 8 to learn the code matching button, and the LED goes off. The LED flashes 5 times, clear OK.

 (If you need to change the working mode for the same remote control, please clear the code before learning)

  learning Code matching:

1. Tap: Press the learning key, the module LED light is on and off, enter the learning state LED light is on, use remote control to press button pairs of codes, the LED light lights up three times (still in the learning state will not light up), continue to press the second button code pair, the LED light flashes three times and turns off, and the code pair is clicked successfully. (The first button is forward and reverse, and the second button is reverse)

2. Self-locking: Press the learning key twice, and the module LED light will be turned off twice. After entering the learning state, the LED light will be turned on, and press remote control pairs of codes with button, the LED light flashes three times and lights up (still in the learning state and will not light up) continue to press the second button pairs, and the LED light flashes three times and goes out, the self-locking code pair is successful (the first button is forward rotation self-locking (press the second to stop), and the second button is reverse self-locking)

3. Interlocking + stop function: Press the learning key three times, the module LED light is on three times and off, after entering the learning state, the LED light is on, press remote control to code with button, and the first button learning is forward, according to the second button learning is reversed, the third button learning is stopped, the learning is completed, the LED lights flash out three times, the interlocking code matching is successful (the first button is forward rotation, the second button is reversed, and the third button is stopped).

4. Clear the code: Press 8 to clear the code.