401 instant adhesive, with long shelf life and good product quality, is widely used in the bonding of PS, PC, PA, ABS, PMMA and other plastics (except polypropylene, polyethylene, polytetrafluoroethylene, almost all plastics can be bonded), which can be bonded to metal, leather, wood, ceramics and other materials.

401 glue information is as follows:

[401 instant adhesive product features]]

● 401 instant adhesive passed the EU ROHS standard and SGS test;

● 401 instant adhesive single-component instant adhesive developed and produced for plastic characteristics;

● 401 instant adhesive has high performance, high strength, single component, aging resistance and other excellent properties, which is very suitable for continuous production line operations.

[401 instant adhesive performance indicators]]

No.: 051701 instant adhesive

Product features: plastic adhesive type, sweat resistance, impact resistance, high peel resistance

Application Scope: suitable for bonding rubber, metal and plastic parts.

Color: colorless transparent liquid colorless transparent liquid

Viscosity (mpa.s): 100-150

Temperature range (℃): -50 ~ +160

Tensile strength (kg/cm2): 160

Shear strength (Mpa): 300

Curing speed (s): 5-10

Appearance/packaging: 20 g/piece

401 instant adhesive tips: The above performance data is a typical data measured in a laboratory environment with a temperature of 25 ℃ and a humidity of 70%, which is for reference only when used by customers, it is not guaranteed that all data can be obtained in a specific environment. Please test the accuracy of the data when using it.

[401 instant adhesive usage]]

● Use dry cloth or sandpaper to remove the dust, oil stain, rust, etc. on the landing surface, and then wipe with cleaning agents such as acetone or trichloroethylene to clean the surface.

● unscrew the front cover and use it; If there is glue on the bottle mouth, wipe the glue clean with cotton cloth first, and then put a needle or PE dropper on it for use, so as to control the glue flow and ensure the use effect.

● drop a small drop of adhesive on the surface to be attached, immediately bond, and keep until hardening, firm time ranging from seconds to minutes. The practical strength can be reached in about 30 minutes, and the highest strength can be obtained after 24 hours.

● Clean the bottle mouth after use and tighten the lid.

● store the glue in a cool and dry place after use.

[Precautions for 401 instant adhesive]]

● Do not wear woven gloves. If instant adhesive is absorbed by the woven material of the gloves, polymerization reaction will occur quickly. During the reaction, high heat will be generated, which will burn your hands, so please remember, do not wear woven gloves.

● If your eyes touch accidentally, the glue will hurt your eyes due to its hardness after curing. Do not rub them with your hands, and rinse them with plenty of clean water or hot compress them with warm towels to make your eyelids sweat naturally, do not forcibly pull it apart, and send it to the doctor for emergency treatment in severe cases; Soak it in warm soap water when touching the skin, which can be removed with Ys emulsifier or Ys series remover.

● instant adhesive is volatile and irritating. Please keep ventilation in the workplace when using it in large quantities.

● when there is a large amount of leakage, it can be cured with water and then scraped off.

[401 instant adhesive storage and packaging]]

● This product should be sealed and stored in a ventilated, cool and dry place;

● To prolong the storage time, refrigerator can be used for refrigeration;

● The shelf life is 12 months. If the expiration time is qualified, you can continue to use it;

● The packaging specification is 50 pcs/box, 500 pcs/box