Colored steel tile self-adhesive waterproof and thermal insulation coiled material, self-adhesive waterproofing membrane dedicated for roof covering, can be used for more than ten years
covered with rusty and leaking colored steel tile roof, cement roof, aging and leaking linoleum felt, glass roof waterproof and heat insulation, simple construction, no need to fire brush for broiling glue, paste directly, paste once, it can be used for more than ten years.
Application Scope, suitable for electroplating, chemical industry, paper making, ceramics, breeding, leather, printing and dyeing, high temperature casting and other serious corrosion, waterproof and heat insulation requirements of colored steel tile factory buildings, warehouses, large shopping malls.
For more information about specifications and colors, contact customer service 18639026652 colored steel tile roof construction technology
colored steel tile self-adhesive waterproofing membrane, as a kind of building material, it is widely used in industrial plant construction and civil roof construction for its light weight, environmental protection and high cost performance, and it is used to treat colored steel tile roofs that leak rust, rain and rain.

Waterproof base condition
1. Make sure that there is no dust or looseness on the base surface of colored steel tile. If there is any looseness, it can be constructed only after it is handled.
2. There can be no water accumulation on the base surface. If there is water accumulation, the waterproof layer can be constructed only after it needs reinforcement and treatment.
3. Colored steel tile the gap needs to be reinforced when necessary, and then the construction will be carried out.
4. Additional layers are required for Yin-Yang angle, pile elevation and plane Yin angle, elevation Inner angle and outer angle.
5. In the morning, the construction needs to be stopped when there is dew on colored steel tile sides of the construction.
6. During the construction in severe winter, the base treatment agent needs to be brushed on colored steel tile.

II. Operation process
1. Cleaning the base surface: check the stains and corrosion of the base surface, wipe off the dust on the surface of the base layer with a cloth. If there is rust, remove the rust. Wash the roof with washing water and keep it flat.
2. Additional layer: Additional layer is required for Yin-Yang angle, vent, gutter and other places, about 15cm ~ 30cm, and the paving is extended along the central axis of Yin-Yang angle.
3. Construction: first use the reference line, and the coiled material laid can achieve neat and beautiful effect; To align the coiled material and the construction part, the coiled material can be rolled up from both sides; Cut the isolation paper from the middle, uncovering the isolation paper and squeezing the coiled material to keep the coiled material flat.
4. Requirements: when laying coiled materials, the construction starts from the downhill direction of running water, and the standing wall is laid from high to lower; Air should be removed, the coil rolls roll and squeeze the internal air to achieve the effect of firm bonding of the coil; When the temperature is relatively low, both the coil and the base layer need to be coated with the base treatment agent; The lap length of the coil is 3cm ~ 8cm, the short side is 10 cm; The exposed coiled materials need to be sealed with sealant for short side lap and coiled materials receiving.
Colored steel tile roof construction technology
III. Paving method
paving method: colored steel tile special waterproof coiled materials are laid on the roof of colored steel tile, which can make the roof fully achieve the effect of waterproof and anti-corrosion.
IV. Construction precautions
1. The roof cannot have dust. If you need to brush the treatment agent, it is not easy to be too thick.
2. The thickness should be 1.5mm or 2mm.
3. Construction under appropriate circumstances, do not build in foggy days or heavy rain as soon as it stops, moisture will produce bubbles.
4. The long side and short side of coiled material are not less than 10cm.
5. The lap joint between coiled material and coiled material and before coiled material and reinforcing layer must be firm.
6. For the waterproof layer just after construction, it should not be uncovered casually, because the longer the bonding time is, the stronger the material will be. If it is uncovered more than twice, the phenomenon of unstable bonding will easily occur, only by brushing the basic treatment agent can it be completely bonded.
7. When the temperature of the roof is too high, a large amount of materials cannot be stored on the roof. It is better to put a roll in one roll, so as not to cause the isolating membrane of the coiled material to be uncovered easily. Product features:
1. Sun protection, heat insulation, reflected light: The surface temperature can be reduced by less than 20 degrees when the sun is exposed in summer, and the indoor temperature of the workshop can be reduced by 6-12 degrees.
2. Water resistence and leak repairing anti-rust, anti-rain and acid, anti-corrosion, UV protection
3. Prevent roof aging, prolong the service life of colored steel tile factory building for more than 10 years, and have beautiful appearance. After the construction is completed, you can still move on the roof.
4. Effectively keep out the sound of rain, especially the steel frame workshop roof.
5. No need to replace the colored steel tile roof rust vulnerability.
6. Cold resistance, minus 40 degrees will not be affected, and the outer aluminum layer is fireproof and flame retardant.
● application scope:
generally applicable to steel frame workshop roof and other buildings top insulation, water resistence and leak repairing, sound insulation, rust prevention, damage repair, aging renovation: it is currently a relatively high-quality insulation water resistence and leak repairing material. After installation, when exposed to the sun in summer, the indoor temperature can be reduced by 30%-40%, and the higher the temperature, the greater the cooling.
Add wechat 18639026652 when needed
recommended waterproof products