Product Parameters

model: Q1

voltage input: DC5V = 0.5-1.0A

power: 1W

battery: 800 mA

battery cycle times: 500 times

usage time: 30-36 hours

charging time: 1-1.5 hours

product color: white

product Size: 80*80 * 33mm

color box size: 88*88 * 56mm

product gross weight: 155g (including color box)

product Weight: 100g

inspection: Qualified

origin: Shenzhen, China

instructions

1. This product has a total of 5 button, a switch button (including play/pause function), a timing button, a light button, and a previous song (including sound reduction function), one next song (including sound plus function).

2. There are 9 sleep-helping music in total (white noise, Sea sound, rain sound, bird sound, water flow sound, Cradle Music 1, Cradle Music 2, Cradle Music 3)

3. The light button can work independently, and it can also work without starting up.

4. Long press 0.5 the key is to turn on in seconds. Short press is to pause the playback. After the startup, a piece of music is played, and the music is kept in a loop. Press the top and bottom to switch. Press the top and bottom to add and subtract the volume. Turn on the backstrap memory to play. Which music also has memory. The music that was turned off automatically will be played on the next boot.

5. Press the light button and divide it into 6 cycles. It is a cycle from 10 minutes to 0. The countdown starts at 10 minutes and the breathing rhythm gradually slows down in 10 minutes. The light is on for inhalation, the light is weak for exhalation, and the breathing is guided. This function is automatically turned off for one hour at a time. If the timing function is on, the timing function will be turned on according to the timing time.

6. The timing is divided into 15 minutes (luminous red LED)30 minutes (bright green LED)60 minutes (bright blue LED) short Press to switch, and the timing is turned off at the 4th. LED lights are used respectively to indicate.