Chat
Nuclear Radiation Detector Marble Radioactive Individual Dose Alarm Geiger Tube Radiation Monitor
| Packaging information: |
|
|---|
Call before purchasing radiation equipment
Contact Phone: 17342011324
1Q: what model is the sensor?
A: built-in large factory high specification 613GM tube, quality assurance, small measured error range, stable reading.
7Q: What is the biggest selling point of this product?
A: This product is made of aluminum alloy metal shell, high quality paint process, TFT strip color screen, ultra-low power consumption, ultra-long standby, this product is less homogeneous, small and exquisite, can be carried around, it is very convenient to hold your hand or put your pants pocket. There are few good-looking aluminum alloy shell styles in the whole network, including domestic and EU patents.
8Q: is this product limited?
A: The limited price of this product. Please come according to the requirements of the customer service staff. It cannot be lower than the minimum price. Otherwise, the goods may be out of stock.
Button description
1. Shut down/pause button/return to the main interface. Press for 2 seconds to shut down/start up. During startup, press short to pause real-time data. Press short again to continue real-time data.
Short press this button for any interface except the main interface to return to the main interface function (pause or real-time icon reminder)
2. Turn the page button short and switch the three function interfaces in real time> maximum + average + total> histogram (with interface navigation bar),
when switching to the other two interfaces, it will stay for a long time unless switching back or pressing the 1 Key to return to the main interface.
3. Mute/vibration button/screen short press cycle switch reminder mode: only sound reminder-only vibration reminder-sound and vibration reminder-turn off reminder this button only works when Interface 1 and Interface 2,
"This button has no function on other interfaces (because other pages do not display sound and vibration reminder icons, this button function is not set on other interfaces)
long press is the screen, short press any button to light the screen during the Screen"
4. Set alarm value short Press to enter alarm value setting: short press once is the maximum alarm, and short press again is the total alarm. In these two interfaces, press long to enter the settings. When setting, the alarm value flashes,
press page turning button to select the alarm value. Press again to save and exit. Save the current settings and exit to the main interface if there is no operation for 5 seconds or press 1 button in the two interfaces of 4.
Interaction description
software interaction logic:
1. Boot interface hello, shutdown interface good-bye
2. The alarm tone of the ringing alarm, the prompt time is 1 second (every time from low to high, it is triggered once exceeding the alarm value)
3. Vibration reminder, reminder time is 0.5 seconds (every time from low to high, it is triggered once exceeding the alarm value,)
4. The LED lights of the host flash, lower than the alarm value flashing green light, flashing frequency 1 second once, higher than the alarm value flashing red light, 0.5 seconds once.
5. When the real-time data on the main interface is lower than the alarm value, the green value is displayed, the alarm value is exceeded, and the red value is displayed. When the RATE real-time data is set, when the number flashes, press the Flip button to select values such as 0.6 2.5 4.0 6.0 8.0.
When setting the total DOSE value, 1.3 2.5 4.0 6.0 8.0 are available.
