Application and application:

This glue can be used for board, plywood, board fireproofing, density plate, linen board, curved Willow board, aluminum-plastic board and other boards; It can also be used for bonding parts of steel, aluminum, rubber, plastic, leather, fabric and other materials.
This glue is widely used in interior decoration, art advertisement and automobile interior decoration.

 Usage:

Wipe off the grease, dirt and other dirt on the adhesive surface. If the surface contains demoulding agent (the product is coated on the mold during molding and has anti-sticking effect), before bonding, use solvent to wipe off demoulding agent of the surface. For a particularly smooth and hard-to-stick surface, it should be brushed. When the water content is high, it should be dried first and then bonded.

◆ Use a brush or scraper to evenly glue the adhesive surface from the inside to the outside (if a large area is bonded, it is recommended to glue the two adhesive surfaces at the same time), under normal temperature conditions, the humidity is less than 70%, and the air is allowed for 5 to 15 minutes (subject to the slight non-stick glue layer).
◆ align the adhesive surface at a time, squeeze from inside to outside (eliminate bubbles), Knock and compact with rubber hammer or wooden hammer, and reach the service strength after 24 hours