Chat
Dezhou Chuangtao Mechanical and Electrical Equipment Co. Ltd. was established in 2015, focusing on the research and development and production of heating and cooling equipment. At present, we mainly produce parking heaters, parking air conditioners, parking generators, solar air conditioners, solar refrigerators. We always adhere to the business philosophy of quality first win-win cooperation, and hope to exchange and co- operate with friends from all over the world. Due to good quality, competitive price,professional technical support and good service, Our products are sold to more than twenty countries(Pakistan, Nigeria,Canada,Costa-Rica, Cyprus, Mozambique Turkey, Thailand, Philippines, Belgium, Indonesia, etc).
car rooftop air conditioner rv ac dc truck compressor
| Packaging information: |
|
|---|
Product descriptions from the supplier
Product Description
|
Name
|
universal electric 12v car rooftop air conditioner rv ac dc truck compressor
|
|
Outside Size
|
450*410*300mm
|
|
Inside Size
|
500*140*300mm
|
|
Power
|
500-800W
|
|
Refrigerant
|
R134a
|
|
Voltage
|
DC12V/24V
|
|
Air volume
|
760m3/h
|
|
Color
|
red,black，white
|
|
Refrigerant capacity
|
2.5kw
|
The parking air conditioner is actually the refrigerant circulating in the air-conditioning system. The refrigerant in the
evaporator in the cab is converted from liquid heat absorption to gas, so that the temperature in the cab is reduced; in the
condenser, the high temperature and high pressure gas heat dissipation and cooling are converted to liquid. So as to bring the
heat out of the cab to outside the cab. The core of the parking air conditioner is the compressor, and the compressor plays a role
in promoting the entire refrigerant cycle. Therefore, the main components of the entire air conditioning system are the evaporator
inside the cab, the condenser outside the cab, and the compressor. In fact, the air-conditioning system is an opposite system. As
long as the refrigerant cycle is promoted, the air-conditioning system can operate normally
evaporator in the cab is converted from liquid heat absorption to gas, so that the temperature in the cab is reduced; in the
condenser, the high temperature and high pressure gas heat dissipation and cooling are converted to liquid. So as to bring the
heat out of the cab to outside the cab. The core of the parking air conditioner is the compressor, and the compressor plays a role
in promoting the entire refrigerant cycle. Therefore, the main components of the entire air conditioning system are the evaporator
inside the cab, the condenser outside the cab, and the compressor. In fact, the air-conditioning system is an opposite system. As
long as the refrigerant cycle is promoted, the air-conditioning system can operate normally
Product advantages
1. Thick aluminum condenser, anti-corrosion aluminum, good ventilation and heat dissipation, fast flow rate, rapid cooling 2.Stainless steel housing, corrosion resistant, non-deformable
3. Save oil and electricity
4. Remote one-click control
5.Intelligent frequency conversion
6. Super large air volume with silent air, 360 degree air supply, three speed selection
7. Large air outlet
8. High-quality screw fittings with fine workmanship
9. Ultra-thin model with a maximum width of 17cm
10. Utomatic speed changing, fast cooling, super long standby time
11. The compressor used has the largest diameter with the stronger refrigeration
12. With double circuit controller
13. Automatically adjust temperature according to room temperature
Product components display
Air conditioning manufacturers
The air conditioners we manufacture fall into three main categories - integral overhead air conditioners, split air conditioners and concealed air conditioners. All air conditioners use scroll compressors and can cool up to 9600 btu,Compressors available in 12V and 24V.This electric air conditioner is run by a battery (generator). You can still use the air conditioner even when the engine is switched off. Low noise, energy saving and environmental friendly is your best choice.
Our factory
About Us
Application
Our Services & Strength
1.OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback. If you have any questions about the problem, contact with us, we will offer the solve way for you
Packing&Shipping