1. Power supply AC220-240V,50Hz/60Hz
2. Turn on the machine, heat up, and rotate the fan. It works for 12 hours by default without pressing any button;
3. Press the time key to switch to the timing setting, old = press the "+-" Key to set the timing time; New = Press the time key to set the time, and then press the time key to switch back to the temperature setting;
4. The initial display temperature is 20 degrees Celsius, and the temperature setting is set by pressing the up and down keys, ranging from 15 to 32 degrees Celsius; The time setting is set to 1 to 12 hours;
5. Press the fan key to switch the high (HH) low (LL) two-speed fan speed;
6. Set the temperature, cut off the heating, stop after the fan continues to work for 60 seconds, the screen displays OF, lower than the set temperature-1, re-heating;
7. Arrive at the scheduled time (if not set, the default is 12 hours). Cut off the heating and stop after the fan continues to work for 60 seconds. The screen displays;
8. After finishing the work, press any key to restart the work (if no timing is set, the default is 12 hours)
9. If there is a "natural wind" function, press and hold the "+-" button for three seconds to start, and then display CC; Continue to press and hold the "+-" button for three seconds to close, and display the setting before the "natural wind" starts.